Oil & Gas organizations rely on high equipment availability, safe operations, and disciplined cost control. A robust CMMS/EAM process—paired with effective materials planning & scheduling—is the backbone for delivering r ...

• London
• 5 -Days
• USD-6950
• 05-10-2026

Maintenance is a high-leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health, and the environment, nd the cost of production. The results and benefits ...

• London
• 5 -Days
• USD-6950
• 19-10-2026

Each maintenance department needs to achieve two conflicting objectives: Maximizing asset availability and reliability with optimal cost. Maintenance planning and scheduling are the first steps necessary to assist you in ...

• London
• 5 -Days
• USD-6950
• 16-11-2026

The success of every company depends of each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes and ...

• London
• 5 -Days
• USD-6950
• 23-11-2026

Not all of the plant facilities and equipment require high reliability; economically some components can be allowed to run to failure and a reasonable level of reliability is acceptable for other components. A cost effec ...

• London
• 5 -Days
• USD-6950
• 14-12-2026

Life cycle costs are the summation of project equipment costs from inception to disposal with consideration for the time cost of money. Finding costs requires knowledge of the life and death of equipment. The course uses ...

• London
• 5 -Days
• USD-6950
• 04-01-2027

This unique program is designed for oil and gas industry personnel, suppliers, contractors and subcontractors responsible for the design, construction, inspection, maintenance, regulatory compliance, or operation of API ...

• London
• 5 -Days
• USD-6950
• 18-01-2027

Pumps provide flow of water, fuel, oil, slurries, wastes, and treatment chemicals very reliably. Proper design, selection, testing and commissioning require a thorough understanding of pumps technology. This training cou ...

• London
• 5 -Days
• USD-6950
• 18-01-2027

Reinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be disc ...

• London
• 5 -Days
• USD-6950
• 18-01-2027

When done well your maintenance strategies deliver the six purposes of maintenance, equipment reliability, failure avoidance, defect elimination, least operating costs, risk reduction and maximum production. Fail to do a ...

• London
• 5 -Days
• USD-6950
• 25-01-2027

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the ...

• London
• 5 -Days
• USD-6950
• 25-01-2027

As the process plants have got bigger, the machines have become larger in terms of their power ratings and complexity. At the same time, the demand for efficient operation and higher availability of these machines has be ...

• London
• 5 -Days
• USD-6950
• 25-01-2027

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

• London
• 5 -Days
• USD-6950
• 25-01-2027

This course aims to introduce participants to the fundamental concepts of robotics, including robot design, mechanics, sensors, actuators, control systems, and programming. It provides hands-on experience with building a ...

• London
• 5 -Days
• USD-6950
• 01-02-2027

Process Plant Optimization plays very important role in today’s industrial world. For optimization benefits to be substantial, cost of production including operation interruptions must be kept to a minimum. This requires ...

• London
• 5 -Days
• USD-6950
• 01-02-2027

As equipment and processes have become more complex so too has the work of maintainers and operators become more complicated thereby increasing the need for written procedures. Sound management practices encourage writte ...

• London
• 5 -Days
• USD-6950
• 01-02-2027

RCA is an approach for identifying non-conformance underlying causes of why an incident occurred so that the most effective solutions can be identified and implemented. It's typically used when something goes badly, but ...

• London
• 5 -Days
• USD-6950
• 01-02-2027

Various forms of cracks or crack-like indications are known to be present on pipelines, which could become a safety concern to their safe operation. The most typical forms of cracking and its derivatives are environment- ...

• London
• 5 -Days
• USD-6950
• 15-03-2027

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

• London
• 5 -Days
• USD-6950
• 15-03-2027

This course is packed with the insights and the powerful techniques of successful maintenance planning and scheduling for high equipment reliability. The comprehensive content gives you best practice maintenance planning ...

• London
• 5 -Days
• USD-6950
• 22-03-2027

This course enables you to develop a powerful vision for asset & maintenance management improvement and improve your abilities to successfully promote and adapt changes in the work place. You will learn how to apply seve ...

• London
• 5 -Days
• USD-6950
• 22-03-2027

This comprehensive course covers the operation, maintenance, troubleshooting, and safety aspects of gas compressor packages. It emphasizes best practices for enhancing reliability, reducing downtime, and ensuring safe ...

• London
• 5 -Days
• USD-6950
• 22-03-2027

This advanced training program is designed to provide experienced maintenance professionals in the oil and gas industry with in-depth knowledge and specialized skills to effectively maintain and optimize the performance ...

• London
• 5 -Days
• USD-6950
• 22-03-2027

This 5-day course offers delegates a comprehensive overview of the design, construction, control and operation of screw compressors of the type normally found in the oil, gas, and other process industries. The course de ...

• London
• 5 -Days
• USD-6950
• 22-03-2027

This five-day course has been designed to give delegates a good grounding in mechanical maintenance. The course covers fundamental safety, drive systems, disassembly & assembly techniques, preventative maintenance, fault ...

• London
• 5 -Days
• USD-6950
• 29-03-2027

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

• London
• 5 -Days
• USD-6950
• 26-04-2027

This course will provide you with comprehensive training to develop skills to better manage workplace maintenance people. By attending, you will gain advice for the most effective methods to develop your people skills an ...

• London
• 5 -Days
• USD-6950
• 03-05-2027

Organizations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

• London
• 5 -Days
• USD-6950
• 03-05-2027

Proper maintenance includes, among other things, ensuring that lamps and reflectors are working, and tires are not worn. Some example roadside safety violations that may cause road accidents include operating an out-of-s ...

• London
• 5 -Days
• USD-6950
• 03-05-2027

In the competitive environment of today, availability and reliability of assets are more than ever an important issue. A significant trend in maintenance is outsourcing maintenance activities to contractors. Maintenance ...

• London
• 5 -Days
• USD-6950
• 03-05-2027

This 5-day intensive program provides foundational knowledge and practical skills related to the operation, maintenance, and planning of key building systems—namely HVAC, plumbing, electrical, and civil infrastructure. I ...

• London
• 5 -Days
• USD-6950
• 03-05-2027

Machines deteriorate as they get older so we can expect a certain amount of performance falloff and general deterioration of the machine. If we understand the failure mechanisms that are in place we can identify which pa ...

• London
• 5 -Days
• USD-6950
• 10-05-2027

Maintenance planning and scheduling using structured and systematic approaches are critical for every successful plant. Maintenance planning and scheduling are the fastest and most effective investments that an organizat ...

• London
• 5 -Days
• USD-6950
• 24-05-2027

This course will highlight the added value that mobile lifting equipment operation and maintenance can offer to support engineers and technicians working in heavy transportation and lifting, petroleum industries, and con ...

• London
• 5 -Days
• USD-6950
• 24-05-2027

Gas turbines are critical components in power generation, aviation, and industrial applications. Proper balancing of rotating components is essential to ensure efficiency, reliability, and longevity, while minimizing vib ...

• London
• 5 -Days
• USD-6950
• 24-05-2027

This course prepares engineers and inspectors to apply API 653 for the inspection, repair, alteration, and reconstruction of aboveground storage tanks (ASTs). It bridges standard requirements with practical field techniq ...

• London
• 5 -Days
• USD-6950
• 07-06-2027

MTA is the identification of the steps, spares and materials, tools, support equipment, personnel skill levels as well as any facility issues that must be considered for a given repair task. Also included in the MTA are ...

• London
• 5 -Days
• USD-6950
• 07-06-2027

HVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ...

• London
• 5 -Days
• USD-6950
• 14-06-2027

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any Oil/Gas Production operation. Good fabrication of these components, based ...

• London
• 5 -Days
• USD-6950
• 21-06-2027

This 5-day course provides Installation, Operation & Maintenance instructions for the popular Bently Nevada 3500 series On-Line Condition Monitoring System. We will provide an overview of the system development and speci ...

• London
• 5 -Days
• USD-6950
• 12-07-2027

Misalignment is one of the main causes of vibration in rotating equipment. This leads to increased maintenance and reduced machine life. Appropriate alignment could save maintenance and operational costs for the organisa ...

• London
• 5 -Days
• USD-6950
• 02-08-2027

This highly interactive training course enables you to develop a powerful vision for asset & maintenance management improvement and improve your abilities to successfully promote and adapt changes in the workplace. You w ...

• London
• 5 -Days
• USD-6950
• 16-08-2027

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

• London
• 5 -Days
• USD-6950
• 23-08-2027

This comprehensive training course is designed to provide participants with a solid understanding of custody transfer systems and flow measurement technologies, with a strong focus on fiscal metering station componen ...

• London
• 5 -Days
• USD-6950
• 23-08-2027

This programme provides a comprehensive understanding of the various types of reciprocating, rotary, and dynamic compressors. This includes trunk piston, sliding crosshead piston, diaphragm, rotary screw, straight lobe, ...

• London
• 5 -Days
• USD-6950
• 13-09-2027

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this course is to present basic characteristics of efficient operation of pipelines in various engineering app ...

• London
• 5 -Days
• USD-6950
• 20-09-2027

Aboveground storage tanks (ASTs) are critical assets in the oil, gas, petrochemical, and chemical industries. Their proper design, construction, operation, and inspection are essential for ensuring environmental protecti ...

• London
• 5 -Days
• USD-6950
• 04-10-2027

Not all of the plant facilities and equipment require high reliability; economically some components can be allowed to run to failure and a reasonable level of reliability is acceptable for other components. A cost effec ...

• London
• 5 -Days
• USD-6950
• 01-11-2027

CCMaintenance is a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, nd the cost of production. The results and benefits ...

• London
• 5 -Days
• USD-6950
• 08-11-2027

Within the boiler, piping and pressure vessel industry, control and safety relief are of most essential importance. Pressure relief valves are the last line of defense against catastrophic failure or even loss of life. T ...

• London
• 5 -Days
• USD-6950
• 22-11-2027

Artificial lift plays a crucial role in oil & gas production, especially in mature oilfield. Artificial lift is not only accelerating the production, but also vital to the economic success of the overall development. The ...

• London
• 5 -Days
• USD-6950
• 22-11-2027

Pipelines are a major asset in most Oil & Gas operators, and ensuring its functionality and effectiveness is a paramount operation and business requirement. This Onshore Pipeline Engineering: Design, Construction and Mai ...

• London
• 5 -Days
• USD-6950
• 22-11-2027

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

• London
• 5 -Days
• USD-6950
• 06-12-2027

The course is designed for participants to understand the principles of the Types, function, Specification and classification of valves. Then cover the valves maintenance, troubleshooting and repair This course presents ...

• London
• 5 -Days
• USD-6950
• 13-12-2027

This course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ...

• London
• 5 -Days
• USD-6950
• 13-12-2027

The course will introduce delegates to the various types of compressors and associated terminology. Centrifugal and positive-displacement compressors, packing, mechanical seals and sealing systems, bearings and couplings ...

• London
• 5 -Days
• USD-6950
• 20-12-2027

When done well your maintenance strategies deliver the six purposes of maintenance, equipment reliability, failure avoidance, defect elimination, least operating costs, risk reduction and maximum production. Fail to do a ...

• Istanbul
• 5 -Days
• USD-5950
• 05-10-2026

This course provides an in-depth understanding of the API 670 standard, which governs machinery protection systems for rotating equipment. Participants will learn how to design, implement, and maintain vibration monitori ...

• Istanbul
• 5 -Days
• USD-5950
• 26-10-2026

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

• Istanbul
• 5 -Days
• USD-5950
• 26-10-2026

This course provides a comprehensive understanding of API 571, which covers damage mechanisms affecting fixed equipment in the refining and petrochemical industries. Participants will learn how to identify, evaluate, and ...

• Istanbul
• 5 -Days
• USD-5950
• 02-11-2026

Now every industrial business can reach operational excellence performance and deliver maximum operating profits. Through this operational excellence course your operation can become highly effective, efficient and relia ...

• Istanbul
• 5 -Days
• USD-5950
• 02-11-2026

The purpose of this training course is to present basic characteristics of efficient operation of pipelines in various engineering applications. Risk management has been embraced by both the pipeline industry and regula ...

• Istanbul
• 5 -Days
• USD-5950
• 09-11-2026

The use of in-line tools for inspection and cleaning is accepted as essential for the safe and profitable operation of all pipelines. Now, Regulations require internal inspections using geometry pigs for detecting change ...

• Istanbul
• 5 -Days
• USD-5950
• 23-11-2026

Gas turbines are critical components in power generation, aviation, and industrial applications. Proper balancing of rotating components is essential to ensure efficiency, reliability, and longevity, while minimizing vib ...

• Istanbul
• 5 -Days
• USD-5950
• 23-11-2026

Rotating Equipment's are the pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting has tre ...

• Istanbul
• 5 -Days
• USD-5950
• 23-11-2026

About Course The Condition Monitoring Diploma is one of the richest trainings in terms of the content and fundamental knowledge coverage. The training range covers all applications of different condition monitoring techn ...

• Istanbul
• 5 -Days
• USD-5950
• 23-11-2026

Corrosion problems have always presented a severe challenge to oil and gas producing operations. Operators plan for long periods of continuous production with maintenance scheduled for the prescribed shutdown periods. Un ...

• Istanbul
• 5 -Days
• USD-5950
• 23-11-2026

Desalination plants play a critical role in providing reliable freshwater supplies, especially in arid and water-scarce regions. The complexity of desalination systems whether thermal or membrane-based requires well-stru ...

• Istanbul
• 5 -Days
• USD-5950
• 07-12-2026

The course is designed for participants to understand the principles of the Types, function, Specification and classification of valves. Then cover the valves maintenance, troubleshooting and repair This course presents ...

• Istanbul
• 5 -Days
• USD-5950
• 07-12-2026

The course will introduce participants to the different types of pumps and their associated terminology. Centrifugal and positive displacement pumps, packing, mechanical seals and sealing systems, bearings and couplings ...

• Istanbul
• 5 -Days
• USD-5950
• 07-12-2026

Pumping systems account for a significant portion of a facility's energy use in many industries. In the majority of pumping systems, energy added to the working fluid by the pump is much greater than required by the proc ...

• Istanbul
• 5 -Days
• USD-5950
• 07-12-2026

This course prepares engineers and inspectors to apply API 653 for the inspection, repair, alteration, and reconstruction of aboveground storage tanks (ASTs). It bridges standard requirements with practical field techniq ...

• Istanbul
• 5 -Days
• USD-5950
• 07-12-2026

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

The maintenance of physical assets can no longer be treated as an 'engineering problem'. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busin ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

This course was designed to take the mystery out of wondering if your boiler is safe and operating efficiently, and provides maintenance technicians and others the confidence and comfort level needed for operating and ma ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

This comprehensive course includes the work processes and the business systems needed to coordinate and achieve maximum production plant and equipment performance. You will find out how to institute the vital practices a ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

Bearing Root Cause Failure Analysis (RCFA) is a technical program designed to equip maintenance, reliability, and mechanical engineers with the knowledge and tools to analyze, diagnose, and prevent bearing failures in in ...

• Istanbul
• 5 -Days
• USD-5950
• 14-12-2026

The vibrant upstream oil and gas industry is investing large amounts of capital, and investment which will lead to huge payouts in the future. Asset management is challenge that remains and how to improve production outp ...

• Istanbul
• 5 -Days
• USD-5950
• 04-01-2027

This course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ...

• Istanbul
• 5 -Days
• USD-5950
• 04-01-2027

This programme provides a comprehensive understanding of the various types of reciprocating, rotary, and dynamic compressors and pumps. This includes trunk piston, sliding crosshead piston, diaphragm, rotary screw, stra ...

• Istanbul
• 5 -Days
• USD-5950
• 11-01-2027

In the competitive environment of today, availability and reliability of assets are more than ever an important issue. A significant trend in maintenance is outsourcing maintenance activities to contractors. Maintenance ...

• Istanbul
• 5 -Days
• USD-5950
• 11-01-2027

Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ...

• Istanbul
• 5 -Days
• USD-5950
• 11-01-2027

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

Pressure vessels, heat exchangers, aboveground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. These fixed equipments and piping systems are subject ...

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

Preventive and predictive maintenance is a maintenance system which very reliable to prevent some sudden troubles or breakdown that may happened on factory’s tools and equipment. The sudden troubles are very potential th ...

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

This comprehensive course equips you with the knowledge and skills to effectively maintain both on/off and control valves, ensuring optimal performance and preventing costly downtime. Learn from industry experts about va ...

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

Reliability is a cornerstone of any maintenance process. Get it right and you can enjoy good safety performance, low running costs and a sustainably high production level at the right quality. Reliable plants are usually ...

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

The various aspects of pipeline repair using weld and non-weld methods will be covered, as will the concerns for welding onto in-service pipelines and the approaches used to address them.

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

Rotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ...

• Istanbul
• 5 -Days
• USD-5950
• 18-01-2027

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any oil and gas production operation. Good fabrication of these components, b ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

Effectively planned Preventive & Predictive Maintenance which is integrated with the workflow is critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM, TPM, and even ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

Maintenance is a high-leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health, and the environment, nd the cost of production. The results and benefits ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

The maintenance of physical assets can no longer be treated as an engineering problem. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busines ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

The course will introduce delegates to the various types of compressors and associated terminology. Centrifugal and positive-displacement compressors, packing, mechanical seals and sealing systems, bearings and couplings ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

This 5-day intensive course is designed to equip facilities management (FM) professionals with the principles, frameworks, and tools required to manage facility assets strategically across their entire lifecycle—from a ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

One of the most common causes of damaging vibration in rotating equipment is shaft misalignment and coupling defects. This comprehensive course trains the student in the need for precision shaft alignment and vibration a ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

As equipment and processes have become more complex so too has the work of maintainers and operators become more complicated thereby increasing the need for written procedures. Sound management practices encourage writte ...

• Istanbul
• 5 -Days
• USD-5950
• 25-01-2027

Pumps and compressors are generally critical machines in any production process, and hence it is vital that maintenance is most effective for these units. This course aims to provide delegates with a comprehensive unders ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

This course will introduce participants to proven practices that have been successfully applied in 19 key turnaround areas. The practices for any one area are a composite of practices that have been successfully used by ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

Recently, Progressing Cavity Pump is playing a significant role in oil production. PCP has a plenty of benefits compared to other artificial lift such as high efficiency, higher tolerance to sand or solid, less energy co ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

This course provides all the delegates great opportunities to optimize the performance of their systems and equipment to achieve maximum return on investment (ROI). By reducing costs and downtime, while achieving high le ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

This Maintenance and Reliability Technicians Best Practices course is designed to give new and veteran maintenance technicians an overview of the knowledge required to become a Certified Maintenance and Reliability Techn ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

This course will introduce delegates to different types of pumps, compressors, turbines and associated equipment, such as bearings, seals, filters, separators, etc. The focus in the course will be on the start-up and ope ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

Reliability Centered Maintenance is a methodology used to determine the right maintenance tasks to ensure that any physical asset on system containing its uses want it to do, in its present operating context. This course ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

Pipelines are a major asset in most Oil & Gas operators, and ensuring its functionality and effectiveness is a paramount operation and business requirement. This Onshore Pipeline Engineering: Design, Construction and Mai ...

• Istanbul
• 5 -Days
• USD-5950
• 01-02-2027

This Couplings & Shaft Alignment training course will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or ...

• Istanbul
• 5 -Days
• USD-5950
• 15-03-2027

This Course Has Been Designed for Individuals Who is Familiar with Steam Turbine to Understand and be able to make decisions relating for Steam Turbine Failure Analysis Inspection and Troubleshooting Maintenance and Over ...

• Istanbul
• 5 -Days
• USD-5950
• 15-03-2027

This course provides comprehensive training on the maintenance, operation, and performance monitoring of gas compressors which are vitally important for the efficient, reliable and safe operation of the plant. Participan ...

• Istanbul
• 5 -Days
• USD-5950
• 15-03-2027

Reliability Excellence for Managers (RxM) teaches the true meaning of reliability, as well as the tools and processes required to develop, implement and sustain world-class reliability-based performance and a culture of ...

• Istanbul
• 5 -Days
• USD-5950
• 15-03-2027

• Is your equipment (fixed or mobile) failing before planned replacement? • Are you unable to execute maintenance tasks because spare parts are not available? • Have you made significant investment in CBM methods and t ...

• Istanbul
• 5 -Days
• USD-5950
• 15-03-2027

Maintenance, Reliability, and Asset Management Best Practices are critical for every successful individual and company. It is the job of the maintenance professional to optimize the maintenance effort using a structured ...

• Istanbul
• 5 -Days
• USD-5950
• 22-03-2027

Root cause analysis (RCA) is a class of problem solving methods aimed at identifying the root causes of problems or events. The practice of RCA is predicated on the belief that problems are best solved by attempting to ...

• Istanbul
• 5 -Days
• USD-5950
• 22-03-2027

This programme provides a comprehensive understanding of the various types of reciprocating, rotary, and dynamic compressors. This includes trunk piston, sliding crosshead piston, diaphragm, rotary screw, straight lobe, ...

• Istanbul
• 5 -Days
• USD-5950
• 22-03-2027

This popular course will provide you with a broad understanding of the Lean Six Sigma improvement methodology, concepts, and language. The course is targeted at team members who need to develop a general awareness of Lea ...

• Istanbul
• 5 -Days
• USD-5950
• 05-04-2027

This course is designed to teach the skills of availability engineering as detailed in the Facilities Maintenance Management Competency Map. As an intermediate level course we will use root cause failure analysis, statis ...

• Istanbul
• 5 -Days
• USD-5950
• 05-04-2027

Increasingly, production organizations deploy reliability engineering techniques like Reliability-Centered Maintenance (RCM), including failure modes and effects (and criticality) analysis (FMEA,FMECA), root cause analys ...

• Istanbul
• 5 -Days
• USD-5950
• 05-04-2027

Planning and managing shutdowns, turnarounds and outages in the process plant environment is a complex and demanding function. If turnarounds are not properly planned, managed and controlled, companies run the risks of s ...

• Istanbul
• 5 -Days
• USD-5950
• 12-04-2027

Codes and standard can be defined as a set of technical definitions and guidelines that function as instructions for designers, manufacturers, operators, or users of equipment. Depending on the subject, a standard can ru ...

• Istanbul
• 5 -Days
• USD-5950
• 12-04-2027

The advent of the Computerized Maintenance Management System (CMMS) has revolutionized the way organizations manage their maintenance activities. In an era where operational efficiency and asset management are paramount, ...

• Istanbul
• 5 -Days
• USD-5950
• 12-04-2027

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

• Istanbul
• 5 -Days
• USD-5950
• 12-04-2027

ASME B31.8 is the most widely used Code for the design, operation, maintenance, and repair of natural gas distribution and transmission pipelines. This course explains the present-day piping Code provisions, the princip ...

• Istanbul
• 5 -Days
• USD-5950
• 19-04-2027

This course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ...

• Istanbul
• 5 -Days
• USD-5950
• 19-04-2027

Tending to System Maintenance is Necessary for Successful Operation Understanding and reacting to the performance of a reverse osmosis (RO) system is necessary for continued successful operation. It is this interaction ...

• Istanbul
• 5 -Days
• USD-5950
• 19-04-2027

Centrifugal pump and system training course is to reduce the costs associate with owning and running pumps. Organizations spend millions running and repairing pumps. Nine out of ten pumps fails early. If we can improve r ...

• Istanbul
• 5 -Days
• USD-5950
• 19-04-2027

This Integrity Management of Onshore & Offshore pipelines training course identifies the different strategies required to ensure that the integrity and reliability of pipelines is effectively managed throughout the entir ...

• Istanbul
• 5 -Days
• USD-5950
• 19-04-2027

This training program aims to provide the participants with comprehensive theoretical and practical knowledge and enhance their skills for the maintenance and operation of rotating equipment. Emphasis shall be laid on to ...

• Istanbul
• 5 -Days
• USD-5950
• 19-04-2027

Total Productive Maintenance (TPM) is an equipment management program that emphasizes operator involvement and ownership of equipment performance. The goals of a TPM program are to maximize equipment productivity, maximi ...

• Istanbul
• 5 -Days
• USD-5950
• 26-04-2027

Various forms of cracks or crack-like indications are known to be present on pipelines, which could become a safety concern to their safe operation. The most typical forms of cracking and its derivatives are environment- ...

• Istanbul
• 5 -Days
• USD-5950
• 26-04-2027

Leading companies view Maintenance as a high leverage contributor to business profitability, through its impact on equipment capacity, product quality, safety, health and the environment, and the cost of production. The ...

• Istanbul
• 5 -Days
• USD-5950
• 26-04-2027

Maintenance Best Practices are critical for every successful individual and company. Maintenance is a unique business process. To be successfully managed, it requires an approach different from other business processes. ...

• Istanbul
• 5 -Days
• USD-5950
• 26-04-2027

The overall purpose of this course is to provide engineers and senior technicians in their relevant fields with the applied knowledge that enables them to efficiently select, maintain or repair different types of valves, ...

• Istanbul
• 5 -Days
• USD-5950
• 03-05-2027

OEE is the primary measure of performance in TPM. It is calculated by multiplying the availability, efficiency and quality rate of an equipment. This course allows us to understand the 7 major equipment losses encountere ...

• Istanbul
• 5 -Days
• USD-5950
• 03-05-2027

This is a 5-day course designed to prepare attendees for both the Machine Lubrication Analyst Level I and the Machine Lubrication Analyst Level II certification exam offered by the International Council for Machinery Lub ...

• Istanbul
• 5 -Days
• USD-5950
• 03-05-2027

The challenges in delivering a high performing, energy efficient building that caters to the needs of the occupiers is central to day to day activities. Learning about the full range of issues you need to complete your r ...

• Istanbul
• 5 -Days
• USD-5950
• 03-05-2027

This course provides a comprehensive understanding of API 571, which covers damage mechanisms affecting fixed equipment in the refining and petrochemical industries. Participants will learn how to identify, evaluate, and ...

• Istanbul
• 5 -Days
• USD-5950
• 03-05-2027

Desalination plants play a critical role in providing reliable freshwater supplies, especially in arid and water-scarce regions. The complexity of desalination systems whether thermal or membrane-based requires well-stru ...

• Istanbul
• 5 -Days
• USD-5950
• 03-05-2027

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

• Istanbul
• 5 -Days
• USD-5950
• 10-05-2027

This course is for operations and maintenance managers, engineers, and supervisors who want practical solutions and techniques to lift the efficiency, productivity and output of their production and operating assets. The ...

• Istanbul
• 5 -Days
• USD-5950
• 10-05-2027

The production of gas and oil is often accompanied by water and acid gases, such as (H2S) and (CO2) are often present in produced fluids. These increase the corrosivity of the process, which can significantly impact the ...

• Istanbul
• 5 -Days
• USD-5950
• 24-05-2027

This five days course will introduce delegates to the different types of pumps and their associated terminology. Centrifugal pumps theory of operation and main components will all be discussed. The application of the dif ...

• Istanbul
• 5 -Days
• USD-5950
• 24-05-2027

THIS FIVE-DAY COURSE HAS BEEN DESIGNED TO GIVE DELEGATES A GOOD GROUNDING IN MECHANICAL MAINTENANCE. THE COURSE COVERS FUNDAMENTAL SAFETY, DRIVE SYSTEMS, DISASSEMBLY & ASSEMBLY TECHNIQUES, PREVENTATIVE MAINTENANCE, FAULT ...

• Istanbul
• 5 -Days
• USD-5950
• 24-05-2027

Pumps are among the most widely manufactured items in the world and their various designs permit their use in a variety of applications. Pump running with least troubles and consequent less downtime improves whole system ...

• Istanbul
• 5 -Days
• USD-5950
• 24-05-2027

The objective of the course is to provide an integrated program covering the key areas of Operations & Maintenance Management concerned with Planning, Scheduling and Total Productive Maintenance. The program aims to prov ...

• Istanbul
• 5 -Days
• USD-5950
• 07-06-2027

This course will provide attendees with a comprehensive understanding of heat exchanger principles, operation, maintenance, and troubleshooting.

• Istanbul
• 5 -Days
• USD-5950
• 07-06-2027

Organisations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

• Istanbul
• 5 -Days
• USD-5950
• 14-06-2027

There is an alarming trend in industry to discount the potential contribution of the Technical/Operations function to productivity improvement, product quality and gains in market share. Principles taught in this trainin ...

• Istanbul
• 10 -Days
• USD-10710
• 14-06-2027

Being World Class means the ability to compete anywhere in the world. World Class Maintenance simply means the art and science of managing maintenance resources performed by best in class industries from around the world ...

• Istanbul
• 5 -Days
• USD-5950
• 14-06-2027

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

• Istanbul
• 5 -Days
• USD-5950
• 14-06-2027

Why do we have safety or environmental incidents? Why do we suffer mission failures or production shortfalls? Is there a relationship between maintenance and system availability? Can you improve operational performance a ...

• Istanbul
• 5 -Days
• USD-5950
• 14-06-2027

This advanced training program is designed to provide experienced maintenance professionals in the oil and gas industry with in-depth knowledge and specialized skills to effectively maintain and optimize the performance ...

• Istanbul
• 5 -Days
• USD-5950
• 21-06-2027

This 5-day program initially looks at all of the core maintenance management disciplines that support effective work planning, scheduling and work control. The second week builds on the foundation knowledge introduced du ...

• Istanbul
• 5 -Days
• USD-5950
• 21-06-2027

This course provides the fundamentals of Reliability-Centered Maintenance (RCM). The course is not process specific but gives the participant fundamental tools and knowledge required to participate in any RCM analysis pr ...

• Istanbul
• 5 -Days
• USD-5950
• 21-06-2027

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

• Istanbul
• 5 -Days
• USD-5950
• 05-07-2027

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

• Istanbul
• 5 -Days
• USD-5950
• 19-07-2027

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. An organisation’s personnel must familiarize themselves with new equipment, processes and technologies, deve ...

• Istanbul
• 5 -Days
• USD-5950
• 26-07-2027

Planning and scheduling of maintenance work is central to a well functioning maintenance organization. In order for maintenance planning and scheduling to work many other systems need to work well. Most importantly equip ...

• Istanbul
• 5 -Days
• USD-5950
• 02-08-2027

Industrial processes today operate on very large scales with the advent of modern industrial plants. Such plants sometimes operate hundreds of equipment, not to mention thousands of instruments for the measurement and co ...

• Istanbul
• 5 -Days
• USD-5950
• 02-08-2027

The overall purpose of this course is to provide engineers and senior technicians in their relevant fields with the applied knowledge that enables them to efficiently select, maintain or repair different types of valves, ...

• Istanbul
• 5 -Days
• USD-5950
• 02-08-2027

The course will introduce participants to the different types of pumps and their associated terminology. Centrifugal and positive displacement pumps, packing, mechanical seals and sealing systems, bearings and couplings ...

• Istanbul
• 5 -Days
• USD-5950
• 09-08-2027

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any Oil/Gas Production operation. Good fabrication of these components, based ...

• Istanbul
• 5 -Days
• USD-5950
• 09-08-2027

Gas turbines became widely adopted, and many thousands of sets are now installed worldwide. The development of the gas turbine from the theoretical stage to its present worldwide adoption has three main inputs.

• Istanbul
• 5 -Days
• USD-5950
• 09-08-2027

Gas turbines are critical components in power generation, aviation, and industrial applications. Proper balancing of rotating components is essential to ensure efficiency, reliability, and longevity, while minimizing vib ...

• Istanbul
• 5 -Days
• USD-5950
• 09-08-2027

This 5-day intensive program provides foundational knowledge and practical skills related to the operation, maintenance, and planning of key building systems—namely HVAC, plumbing, electrical, and civil infrastructure. I ...

• Istanbul
• 5 -Days
• USD-5950
• 09-08-2027

This five-day course has been designed to give delegates a good grounding in mechanical maintenance. The course covers fundamental safety, drive systems, disassembly & assembly techniques, preventative maintenance, fault ...

• Istanbul
• 5 -Days
• USD-5950
• 16-08-2027

In all steps of designing of pressure equipment related to hydrocarbons and chemical processing and applied in Oil & Gas, Chemical and Process industries, the process safety comes on the top of the list of all considerat ...

• Istanbul
• 5 -Days
• USD-5950
• 16-08-2027

When done well your maintenance strategies deliver the six purposes of maintenance, equipment reliability, failure avoidance, defect elimination, least operating costs, risk reduction and maximum production. Fail to do a ...

• Istanbul
• 5 -Days
• USD-5950
• 23-08-2027

This course provides an overview and covers the main topics for process piping requirements according to the B31.3 Process Piping Code: design and fabrication of piping components or piping flexibility analysis process, ...

• Istanbul
• 5 -Days
• USD-5950
• 23-08-2027

Zero Breakdown Maintenance is built on three key premises. The first is that equipment will only work properly if its parts work properly. The better the condition of the parts, the better and longer the equipment will r ...

• Istanbul
• 5 -Days
• USD-5950
• 06-09-2027

This comprehensive course covers the operation, maintenance, troubleshooting, and safety aspects of gas compressor packages. It emphasizes best practices for enhancing reliability, reducing downtime, and ensuring safe ...

• Istanbul
• 5 -Days
• USD-5950
• 06-09-2027

Corporate ethos which sees change as a survival necessity coupled with continual demands to achieve greater production efficiencies and reduced operating / maintenance costs, means that engineers and technologists are fa ...

• Istanbul
• 5 -Days
• USD-5950
• 06-09-2027

This course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ...

• Istanbul
• 5 -Days
• USD-5950
• 06-09-2027

Artificial lift plays a crucial role in oil & gas production, especially in mature oilfield. Artificial lift is not only accelerating the production, but also vital to the economic success of the overall development. The ...

• Istanbul
• 5 -Days
• USD-5950
• 13-09-2027

This unique program is designed for oil and gas industry personnel, suppliers, contractors and subcontractors responsible for the design, construction, inspection, maintenance, regulatory compliance, or operation of API ...

• Istanbul
• 5 -Days
• USD-5950
• 13-09-2027

As the process plants have got bigger, the machines have become larger in terms of their power ratings and complexity. At the same time, the demand for efficient operation and higher availability of these machines has be ...

• Istanbul
• 5 -Days
• USD-5950
• 13-09-2027

This course explains all fundamental principles of fitness for service, their practical application through case histories, and a step by step evaluation process for each type of degradation mechanism. The course also gi ...

• Istanbul
• 5 -Days
• USD-5950
• 20-09-2027

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, a ...

• Istanbul
• 5 -Days
• USD-5950
• 20-09-2027

Risk-Based Inspection (RBI) methodology enables the assessment of the likelihood and potential consequences of pressure equipment failures. RBI provides companies the opportunity to prioritize their equipment for inspect ...

• Istanbul
• 5 -Days
• USD-5950
• 20-09-2027

Working with heavy equipments is a very dangerous task and there are several dangers associated with them. This program provides training in the operation of heavy equipment, routine maintenance of machinery and field op ...

• Istanbul
• 5 -Days
• USD-5950
• 04-10-2027

This Couplings & Shaft Alignment training course will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or t ...

• Istanbul
• 5 -Days
• USD-5950
• 18-10-2027

Oil & Gas organizations rely on high equipment availability, safe operations, and disciplined cost control. A robust CMMS/EAM process—paired with effective materials planning & scheduling—is the backbone for delivering r ...

• Istanbul
• 5 -Days
• USD-5950
• 25-10-2027

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

• Istanbul
• 5 -Days
• USD-5950
• 01-11-2027

Performing routine maintenance on heavy equipment can keep costs down. Heavy equipment is a large investment and proper maintenance can keep the equipment running properly and significantly extend its useful life. Equipm ...

• Istanbul
• 5 -Days
• USD-5950
• 01-11-2027

Rotating Equipment's are the pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting has tre ...

• Istanbul
• 5 -Days
• USD-5950
• 01-11-2027

HVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ...

• Istanbul
• 5 -Days
• USD-5950
• 01-11-2027

This comprehensive course includes the work processes and the business systems needed to coordinate and achieve maximum production plant and equipment performance. You will find out how to institute the vital practices a ...

• Istanbul
• 5 -Days
• USD-5950
• 01-11-2027

This course provides an in-depth understanding of the API 670 standard, which governs machinery protection systems for rotating equipment. Participants will learn how to design, implement, and maintain vibration monitori ...

• Istanbul
• 5 -Days
• USD-5950
• 15-11-2027

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

• Istanbul
• 5 -Days
• USD-5950
• 15-11-2027

This 5-day course provides Installation, Operation & Maintenance instructions for the popular Bently Nevada 3500 series On-Line Condition Monitoring System. We will provide an overview of the system development and speci ...

• Istanbul
• 5 -Days
• USD-5950
• 15-11-2027

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

• Istanbul
• 5 -Days
• USD-5950
• 15-11-2027

This course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ...

• Istanbul
• 5 -Days
• USD-5950
• 15-11-2027

The use of in-line tools for inspection and cleaning is accepted as essential for the safe and profitable operation of all pipelines. Now, Regulations require internal inspections using geometry pigs for detecting change ...

• Istanbul
• 5 -Days
• USD-5950
• 22-11-2027

This programme provides a detailed understanding of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants. Each of the components such as compressors, gas and ste ...

• Istanbul
• 5 -Days
• USD-5950
• 22-11-2027

We have tailored this course for operational and maintenance personnel who work with our cone crushers and have limited or some practical experience working with this equipment.

• Istanbul
• 5 -Days
• USD-5950
• 22-11-2027

Pumping systems account for a significant portion of a facility's energy use in many industries. In the majority of pumping systems, energy added to the working fluid by the pump is much greater than required by the proc ...

• Istanbul
• 5 -Days
• USD-5950
• 22-11-2027

Misalignment is one of the main causes of vibration in rotating equipment. This leads to increased maintenance and reduced machine life. Appropriate alignment could save maintenance and operational costs for the organisa ...

• Istanbul
• 5 -Days
• USD-5950
• 22-11-2027

Corrosion problems have always presented a severe challenge to oil and gas producing operations. Operators plan for long periods of continuous production with maintenance scheduled for the prescribed shutdown periods. Un ...

• Istanbul
• 5 -Days
• USD-5950
• 22-11-2027

Machines deteriorate as they get older so we can expect a certain amount of performance falloff and general deterioration of the machine. If we understand the failure mechanisms that are in place we can identify which pa ...

• Istanbul
• 5 -Days
• USD-5950
• 06-12-2027

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

• Istanbul
• 5 -Days
• USD-5950
• 06-12-2027

Each maintenance department needs to achieve two conflicting objectives: Maximizing asset availability and reliability with optimal cost. Maintenance planning and scheduling are the first steps necessary to assist you in ...

• Istanbul
• 5 -Days
• USD-5950
• 06-12-2027

In today's manufacturing industries, more and more companies are seeking ways to improve their plant’s performance through the application of continuous improvement tools such as TPM. Although it originated from Japan, T ...

• Istanbul
• 5 -Days
• USD-5950
• 06-12-2027

This course was designed to take the mystery out of wondering if your boiler is safe and operating efficiently, and provides maintenance technicians and others the confidence and comfort level needed for operating and ma ...

• Istanbul
• 5 -Days
• USD-5950
• 06-12-2027

High plant reliability is critical for every successful company, and it has never been more important than it is in the present economic climate. The costs associated with equipment downtime and reduced production can b ...

• Istanbul
• 5 -Days
• USD-5950
• 13-12-2027

The maintenance of physical assets can no longer be treated as an 'engineering problem'. The competitive environment in which business operates requires an approach that integrates the operational objectives of the busin ...

• Istanbul
• 5 -Days
• USD-5950
• 13-12-2027

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

• Istanbul
• 5 -Days
• USD-5950
• 13-12-2027

Effective planned & predictive maintenance are critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM TPM, and even 6-Sigma. This course has been designed to benefit ...

• Istanbul
• 5 -Days
• USD-5950
• 13-12-2027

Predictive & preventive maintenance is a system that enables the user to manage their assets to the maximum use of the cost allocated. A Predictive maintenance system that is cost effective over time and has a number of ...

• Istanbul
• 5 -Days
• USD-5950
• 13-12-2027

Now every industrial business can reach operational excellence performance and deliver maximum operating profits. Through this operational excellence course your operation can become highly effective, efficient and relia ...

• Istanbul
• 5 -Days
• USD-5950
• 20-12-2027

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

• Istanbul
• 5 -Days
• USD-5950
• 20-12-2027

Process Plant Optimization plays very important role in today’s industrial world. For optimization benefits to be substantial, cost of production including operation interruptions must be kept to a minimum. This requires ...

• Istanbul
• 5 -Days
• USD-5950
• 20-12-2027

Proper maintenance includes, among other things, ensuring that lamps and reflectors are working, and tires are not worn. Some example roadside safety violations that may cause road accidents include operating an out-of-s ...

• Istanbul
• 5 -Days
• USD-5950
• 20-12-2027

Root cause analysis (RCA) is a class of problem solving methods aimed at identifying the root causes of problems or events. The practice of RCA is predicated on the belief that problems are best solved by attempting to c ...

• Istanbul
• 5 -Days
• USD-5950
• 20-12-2027

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any Oil/Gas Production operation. Good fabrication of these components, based ...

• Cairo
• 5 -Days
• USD-5450
• 11-10-2026

Effective planned & predictive maintenance are critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM TPM, and even 6-Sigma. This course has been designed to benefit ...

• Cairo
• 5 -Days
• USD-5450
• 25-10-2026

For the successful operation of the FPSO it is of vital importance to understand the process from the wellhead through the topside process, storage and offload. Often putting together an operations team receives scarce p ...

• Cairo
• 5 -Days
• USD-5450
• 01-11-2026

RCA is an approach for identifying non-conformance underlying causes of why an incident occurred so that the most effective solutions can be identified and implemented. It's typically used when something goes badly, but ...

• Cairo
• 5 -Days
• USD-5450
• 08-11-2026

Power Plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ...

• Cairo
• 5 -Days
• USD-5450
• 08-11-2026

Total Productive Maintenance (TPM) is an equipment management program that emphasizes operator involvement and ownership of equipment performance. The goals of a TPM program are to maximize equipment productivity, maximi ...

• Cairo
• 5 -Days
• USD-5450
• 08-11-2026

• Is your equipment (fixed or mobile) failing before planned replacement? • Are you unable to execute maintenance tasks because spare parts are not available? • Have you made significant investment in CBM methods a ...

• Cairo
• 5 -Days
• USD-5450
• 08-11-2026

This course will introduce delegates to different types of pumps, compressors, turbines and associated equipment, such as bearings, seals, filters, separators, etc. The focus in the course will be on the start-up and ope ...

• Cairo
• 5 -Days
• USD-5450
• 15-11-2026

This programme provides a detailed understanding of steam power plants, gas turbines, co-generation, combined cycle plants, wind and solar power generating plants. Each of the components such as compressors, gas and ste ...

• Cairo
• 5 -Days
• USD-5450
• 15-11-2026

Within the boiler, piping and pressure vessel industry, control and safety relief are of Most essential importance. Pressure relief valves are the last line of defense against Catastrophic failure or even lose of life. ...

• Cairo
• 5 -Days
• USD-5450
• 15-11-2026

Various forms of cracks or crack-like indications are known to be present on pipelines, which could become a safety concern to their safe operation. The most typical forms of cracking and its derivatives are environment- ...

• Cairo
• 5 -Days
• USD-5450
• 15-11-2026

Refractories are considered the critical factor for the successful and reliable operation of many high-temperature industrial processes. They are often a major cost item both in general maintenance and also in terms of u ...

• Cairo
• 5 -Days
• USD-5450
• 15-11-2026

This Cost Effective Maintenance Management training course is designed to provide maintenance planners, maintenance and reliability engineering, maintenance programmers, and maintenance managers with the skills and knowl ...

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

Maintenance planning and scheduling using structured and systematic approaches are critical for every successful plant. Maintenance planning and scheduling are the fastest and most effective investments that an organizat ...

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

The vibrant upstream oil and gas industry is investing large amounts of capital, and investment which will lead to huge payouts in the future. Asset management is challenge that remains and how to improve production outp ...

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

Reinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be disc ...

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

Increasingly, production organizations deploy reliability engineering techniques like Reliability-Centered Maintenance (RCM), including failure modes and effects (and criticality) analysis (FMEA,FMECA), root cause analys ...

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

We have tailored this course for operational and maintenance personnel who work with our cone crushers and have limited or some practical experience working with this equipment.

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

Pumps provide flow of water, fuel, oil, slurries, wastes, and treatment chemicals very reliably. Proper design, selection, testing and commissioning require a thorough understanding of pumps technology. This training cou ...

• Cairo
• 5 -Days
• USD-5450
• 22-11-2026

This course is for operations and maintenance managers, engineers, and supervisors who want practical solutions and techniques to lift the efficiency, productivity and output of their production and operating assets. The ...

• Cairo
• 5 -Days
• USD-5450
• 29-11-2026

Zero Breakdown Maintenance is built on three key premises. The first is that equipment will only work properly if its parts work properly. The better the condition of the parts, the better and longer the equipment will r ...

• Cairo
• 5 -Days
• USD-5450
• 29-11-2026

This course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant industry s ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

Rotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

This course covers the vital skills and important insights a Maintenance Planner needs in order to plan, prepare and deliver world class maintenance and reliability results. In the maintenance scheduling training modules ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

Reliability Centered Maintenance (RCM) is commonly used to help establish safe minimum levels of maintenance, determine changes to operating procedures and help establish maintenance regimes and plans. Successful impleme ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

As the process plants have got bigger, the machines have become larger in terms of their power ratings and complexity. At the same time, the demand for efficient operation and higher availability of these machines has be ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

This course provides an overview and covers the main topics for process piping requirements according to the B31.3 Process Piping Code: design and fabrication of piping components or piping flexibility analysis process, ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

This 5-day course offers delegates a comprehensive overview of the design, construction, control and operation of screw compressors of the type normally found in the oil, gas, and other process industries. The course de ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

Artificial lift plays a crucial role in oil & gas production, especially in mature oilfield. Artificial lift is not only accelerating the production, but also vital to the economic success of the overall development. The ...

• Cairo
• 5 -Days
• USD-5450
• 06-12-2026

In the competitive environment of today, availability and reliability of assets are more than ever an important issue. A significant trend in maintenance is outsourcing maintenance activities to contractors. Maintenance ...

• Cairo
• 5 -Days
• USD-5450
• 13-12-2026

Reliability is an engineering discipline with specific principles. Reliability applies scientific know-how to a component, assembly, plant, or process so it will perform its intended function, without failure, for the re ...

• Cairo
• 5 -Days
• USD-5450
• 13-12-2026

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

• Cairo
• 5 -Days
• USD-5450
• 13-12-2026

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

• Cairo
• 5 -Days
• USD-5450
• 13-12-2026

Aboveground storage tanks (ASTs) are critical assets in the oil, gas, petrochemical, and chemical industries. Their proper design, construction, operation, and inspection are essential for ensuring environmental protecti ...

• Cairo
• 5 -Days
• USD-5450
• 10-01-2027

Performing routine maintenance on heavy equipment can keep costs down. Heavy equipment is a large investment and proper maintenance can keep the equipment running properly and significantly extend its useful life. Equipm ...

• Cairo
• 5 -Days
• USD-5450
• 10-01-2027

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

• Cairo
• 5 -Days
• USD-5450
• 10-01-2027

The use of in-line tools for inspection and cleaning is accepted as essential for the safe and profitable operation of all pipelines. Now, Regulations require internal inspections using geometry pigs for detecting change ...

• Cairo
• 5 -Days
• USD-5450
• 10-01-2027

Centrifugal pump and system training course is to reduce the costs associate with owning and running pumps. Organizations spend millions running and repairing pumps. Nine out of ten pumps fails early. If we can improve r ...

• Cairo
• 5 -Days
• USD-5450
• 10-01-2027

Organisations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

• Cairo
• 5 -Days
• USD-5450
• 17-01-2027

This course will highlight the added value that mobile lifting equipment operation and maintenance can offer to support engineers and technicians working in heavy transportation and lifting, petroleum industries, and con ...

• Cairo
• 5 -Days
• USD-5450
• 17-01-2027

The overall purpose of this course is to provide engineers and senior technicians in their relevant fields with the applied knowledge that enables them to efficiently select, maintain or repair different types of valves, ...

• Cairo
• 5 -Days
• USD-5450
• 17-01-2027

Codes and standard can be defined as a set of technical definitions and guidelines that function as instructions for designers, manufacturers, operators, or users of equipment. Depending on the subject, a standard can ru ...

• Cairo
• 5 -Days
• USD-5450
• 17-01-2027

The challenges in delivering a high performing, energy efficient building that caters to the needs of the occupiers is central to day to day activities. Learning about the full range of issues you need to complete your r ...

• Cairo
• 5 -Days
• USD-5450
• 17-01-2027

Pumps and piping systems in the petrochemical industry operate under rigorous demands—handling corrosive, high-temperature, and high-pressure fluids with utmost reliability. This course is designed to build deep technica ...

• Cairo
• 5 -Days
• USD-5450
• 17-01-2027

This popular course will provide you with a broad understanding of the Lean Six Sigma improvement methodology, concepts, and language. The course is targeted at team members who need to develop a general awareness of Lea ...

• Cairo
• 5 -Days
• USD-5450
• 24-01-2027

Upon completion of this course, participants will have gained a thorough understanding of the various steam turbine configurations available to virtually every industrial user. Items discussed include mechanical design f ...

• Cairo
• 5 -Days
• USD-5450
• 24-01-2027

ASME B31.8 is the most widely used Code for the design, operation, maintenance, and repair of natural gas distribution and transmission pipelines. This course explains the present-day piping Code provisions, the princip ...

• Cairo
• 5 -Days
• USD-5450
• 24-01-2027

Corrosion problems have always presented a severe challenge to oil and gas producing operations. Operators plan for long periods of continuous production with maintenance scheduled for the prescribed shutdown periods. Un ...

• Cairo
• 5 -Days
• USD-5450
• 24-01-2027

The overall purpose of this course is to provide engineers and senior technicians in their relevant fields with the applied knowledge that enables them to efficiently select, maintain or repair different types of valves, ...

• Cairo
• 5 -Days
• USD-5450
• 24-01-2027

Each maintenance department needs to achieve two conflicting objectives: Maximizing asset availability and reliability with optimal cost. Maintenance planning and scheduling are the first steps necessary to assist you in ...

• Cairo
• 5 -Days
• USD-5450
• 24-01-2027

This course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ...

• Cairo
• 5 -Days
• USD-5450
• 14-03-2027

HVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ...

• Cairo
• 5 -Days
• USD-5450
• 14-03-2027

In today's manufacturing industries, more and more companies are seeking ways to improve their plant’s performance through the application of continuous improvement tools such as TPM. Although it originated from Japan, T ...

• Cairo
• 5 -Days
• USD-5450
• 14-03-2027

Bearing Root Cause Failure Analysis (RCFA) is a technical program designed to equip maintenance, reliability, and mechanical engineers with the knowledge and tools to analyze, diagnose, and prevent bearing failures in in ...

• Cairo
• 5 -Days
• USD-5450
• 14-03-2027

There is an alarming trend in industry to discount the potential contribution of the Technical/Operations function to productivity improvement, product quality and gains in market share. Principles taught in this trainin ...

• Cairo
• 10 -Days
• USD-9810
• 14-03-2027

• Pressure vessels, heat exchangers, above ground atmospheric storage tanks, and piping systems typically represent over half the capital investment in a process plant. Mechanical engineers at end-user locations or in ce ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

This program is designed for those involved in fleet, transportation and distribution activities, both at the operational and supervisory and managerial levels. Fleet Maintenance Management is a critical position in any ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

This Cost Effective Maintenance Management training course is designed to provide maintenance planners, maintenance and reliability engineering, maintenance programmers, and maintenance managers with the skills and knowl ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

Pipeline systems for oil and gas industry play important role in modern industrial operations. The purpose of this course is to present basic characteristics of efficient operation of pipelines in various engineering app ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

Risk-Based Inspection (RBI) methodology enables the assessment of the likelihood and potential consequences of pressure equipment failures. RBI provides companies the opportunity to prioritize their equipment for inspect ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

This 5-day intensive program provides foundational knowledge and practical skills related to the operation, maintenance, and planning of key building systems—namely HVAC, plumbing, electrical, and civil infrastructure. I ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

This 5-day program initially looks at all of the core maintenance management disciplines that support effective work planning, scheduling and work control. The second week builds on the foundation knowledge introduced du ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

Desalination plants play a critical role in providing reliable freshwater supplies, especially in arid and water-scarce regions. The complexity of desalination systems whether thermal or membrane-based requires well-stru ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

This course explains all fundamental principles of fitness for service, their practical application through case histories, and a step by step evaluation process for each type of degradation mechanism. The course also gi ...

• Cairo
• 5 -Days
• USD-5450
• 21-03-2027

Whatever your hydraulic applications, you can increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent trouble-shooter of problems in this area by attending this information ...

• Cairo
• 5 -Days
• USD-5450
• 04-04-2027

In today’s highly competitive marketplace, it is more important than ever that production plant operates in a safe and reliable way. Unscheduled outages caused by plant breakdown can be very costly and engineers must use ...

• Cairo
• 5 -Days
• USD-5450
• 04-04-2027

This course provides a background for principal organizations issuing codes and standards for design and fabrication of storage tanks (API), indicating code requirements and guidance on design, selection of materials, fa ...

• Cairo
• 5 -Days
• USD-5450
• 11-04-2027

This 5-day course provides Installation, Operation & Maintenance instructions for the popular Bently Nevada 3500 series On-Line Condition Monitoring System. We will provide an overview of the system development and speci ...

• Cairo
• 5 -Days
• USD-5450
• 11-04-2027

As equipment and processes have become more complex so too has the work of maintainers and operators become more complicated thereby increasing the need for written procedures. Sound management practices encourage writte ...

• Cairo
• 5 -Days
• USD-5450
• 11-04-2027

Pumps and compressors are the tow pieces of equipment which are used in almost all manufacturing and processing plants. The effectiveness of their selection, specifications, operations, maintenance and troubleshooting ha ...

• Cairo
• 5 -Days
• USD-5450
• 11-04-2027

This Couplings & Shaft Alignment training course will provide an overview of coupling designs and applications for transferring the torque and rotation from the driver shaft to the rotating machine: pump, compressor or t ...

• Cairo
• 5 -Days
• USD-5450
• 11-04-2027

Effective planned & predictive maintenance are critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM TPM, and even 6-Sigma. This course has been designed to benefit ...

• Cairo
• 5 -Days
• USD-5450
• 18-04-2027

This course is about making money-saving decisions. What’s the best time to replace a vehicle? Is it more economical to buy a new unit than to repair the one you have? Is the size of our fleet too small, or too large, gi ...

• Cairo
• 5 -Days
• USD-5450
• 25-04-2027

Recently, Progressing Cavity Pump is playing a significant role in oil production. PCP has a plenty of benefits compared to other artificial lift such as high efficiency, higher tolerance to sand or solid, less energy co ...

• Cairo
• 5 -Days
• USD-5450
• 25-04-2027

Maintenance & reliability best practices are critical for every successful individual and company. This course delivers many practical and new maintenance and reliability best practices concepts and tools. You will discu ...

• Cairo
• 5 -Days
• USD-5450
• 25-04-2027

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. The overall goal of mechanical completion and commissioning is to verify and document that the system is des ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

Gas turbines became widely adopted, and many thousands of sets are now installed worldwide. The development of the gas turbine from the theoretical stage to its present worldwide adoption has three main inputs.

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

Effectively planned Preventive & Predictive Maintenance which is integrated with the workflow is critical for a successful company and an integral part of maintenance management strategies such as RCM, RBM, TPM, and even ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

Human factors are by far the largest cause of failures and incidents in maintenance. This goes not only for branches like aviation, but also for chemicals, oil & gas, energy and transportation. Investigation shows that a ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

This Maintenance and Reliability Technicians Best Practices course is designed to give new and veteran maintenance technicians an overview of the knowledge required to become a Certified Maintenance and Reliability Techn ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

This course provides an in-depth understanding of the API 670 standard, which governs machinery protection systems for rotating equipment. Participants will learn how to design, implement, and maintain vibration monitori ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

Reliability Centered Maintenance is a methodology used to determine the right maintenance tasks to ensure that any physical asset on system containing its uses want it to do, in its present operating context. This course ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

This 5-day intensive course is designed to equip facilities management (FM) professionals with the principles, frameworks, and tools required to manage facility assets strategically across their entire lifecycle—from a ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

The course will cover topics concerning different types of industrial valves, the control valves and the safety relief valves. Hydraulic pumps, the dynamic and the positive displacement types will be addressed in this co ...

• Cairo
• 5 -Days
• USD-5450
• 02-05-2027

API 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January, 1991. Its scope encompasses the maintenance, inspection, repair, a ...

• Cairo
• 5 -Days
• USD-5450
• 09-05-2027

The course will introduce delegates to the various types of compressors and associated terminology. Centrifugal and positive-displacement compressors, packing, mechanical seals and sealing systems, bearings and couplings ...

• Cairo
• 5 -Days
• USD-5450
• 09-05-2027

This unique program is designed for oil and gas industry personnel, suppliers, contractors and subcontractors responsible for the design, construction, inspection, maintenance, regulatory compliance, or operation of API ...

• Cairo
• 5 -Days
• USD-5450
• 09-05-2027

This course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil and gas plants and petrochemical plants. Principal emphasis is placed on the primary ...

• Cairo
• 5 -Days
• USD-5450
• 09-05-2027

The course is designed for participants to understand the principles of the Types, function, Specification and classification of valves. Then cover the valves maintenance, troubleshooting and repair This course presents ...

• Cairo
• 5 -Days
• USD-5450
• 23-05-2027

Start Up and Commissioning of new plant and equipment presents both a major technical and management challenge. An organisation’s personnel must familiarize themselves with new equipment, processes and technologies, deve ...

• Cairo
• 5 -Days
• USD-5450
• 23-05-2027

Not all of the plant facilities and equipment require high reliability; economically some components can be allowed to run to failure and a reasonable level of reliability is acceptable for other components. A cost effec ...

• Cairo
• 5 -Days
• USD-5450
• 23-05-2027

As equipment and processes have become more complex so too has the work of maintainers and operators become more complicated thereby increasing the need for written procedures. Sound management practices encourage writte ...

• Cairo
• 5 -Days
• USD-5450
• 23-05-2027

Within the boiler, piping and pressure vessel industry, control and safety relief are of most essential importance. Pressure relief valves are the last line of defense against catastrophic failure or even loss of life. T ...

• Cairo
• 5 -Days
• USD-5450
• 23-05-2027

Machines deteriorate as they get older so we can expect a certain amount of performance falloff and general deterioration of the machine. If we understand the failure mechanisms that are in place we can identify which pa ...

• Cairo
• 5 -Days
• USD-5450
• 06-06-2027

This comprehensive training course is designed to provide participants with a solid understanding of custody transfer systems and flow measurement technologies, with a strong focus on fiscal metering station componen ...

• Cairo
• 5 -Days
• USD-5450
• 06-06-2027

Steam Turbines of several types, which have widely varying configurations and applications, are used extensively in the process industries. These steam turbines represent a significant part of the capital and operating c ...

• Cairo
• 5 -Days
• USD-5450
• 13-06-2027

This five-day course has been designed to give delegates a good grounding in mechanical maintenance. The course covers fundamental safety, drive systems, disassembly & assembly techniques, preventative maintenance, fault ...

• Cairo
• 5 -Days
• USD-5450
• 20-06-2027

Planning and scheduling of maintenance work is central to a well functioning maintenance organization. In order for maintenance planning and scheduling to work many other systems need to work well. Most importantly equip ...

• Cairo
• 5 -Days
• USD-5450
• 20-06-2027

This comprehensive course covers the operation, maintenance, troubleshooting, and safety aspects of gas compressor packages. It emphasizes best practices for enhancing reliability, reducing downtime, and ensuring safe ...

• Cairo
• 5 -Days
• USD-5450
• 20-06-2027

Root cause analysis (RCA) is a class of problem solving methods aimed at identifying the root causes of problems or events. The practice of RCA is predicated on the belief that problems are best solved by attempting to ...

• Cairo
• 5 -Days
• USD-5450
• 20-06-2027

This comprehensive course is designed to provide an in-depth perspective of pump technology in terms of selection, operation, maintenance and repair. Topics covered include pump types and terminology, centrifugal and pos ...

• Cairo
• 5 -Days
• USD-5450
• 20-06-2027

In all steps of designing of pressure equipment related to hydrocarbons and chemical processing and applied in Oil & Gas, Chemical and Process industries, the process safety comes on the top of the list of all considerat ...

• Cairo
• 5 -Days
• USD-5450
• 20-06-2027

Organizations invest huge sums of money in systems and processes to implement RCM or TPM, often with little understanding of what are the underlying philosophies of these programs. Each individual philosophy is more suit ...

• Cairo
• 5 -Days
• USD-5450
• 04-07-2027

Maintenance & Reliability Best Practices are critical for every successful individual and company. The first module of this training course delivers many practical and new Maintenance and Reliability Best Practices conce ...

• Cairo
• 5 -Days
• USD-5450
• 04-07-2027

This programme provides a comprehensive understanding of the various types of reciprocating, rotary, and dynamic compressors and pumps. This includes trunk piston, sliding crosshead piston, diaphragm, rotary screw, stra ...

• Cairo
• 5 -Days
• USD-5450
• 04-07-2027

Working with heavy equipments is a very dangerous task and there are several dangers associated with them. This program provides training in the operation of heavy equipment, routine maintenance of machinery and field op ...

• Cairo
• 5 -Days
• USD-5450
• 11-07-2027

Pressure vessels, storage tanks, and piping systems together with rotating machinery for fluid transport represent major capital investment in any oil and gas production operation. Good fabrication of these components, b ...

• Cairo
• 5 -Days
• USD-5450
• 18-07-2027

Pipelines are a major asset in most Oil & Gas operators, and ensuring its functionality and effectiveness is a paramount operation and business requirement. This Onshore Pipeline Engineering: Design, Construction and Mai ...

• Cairo
• 5 -Days
• USD-5450
• 25-07-2027

The advent of the Computerized Maintenance Management System (CMMS) has revolutionized the way organizations manage their maintenance activities. In an era where operational efficiency and asset management are paramount, ...

• Cairo
• 5 -Days
• USD-5450
• 25-07-2027

Oil & Gas organizations rely on high equipment availability, safe operations, and disciplined cost control. A robust CMMS/EAM process—paired with effective materials planning & scheduling—is the backbone for delivering r ...

• Cairo
• 5 -Days
• USD-5450
• 25-07-2027

The success of every company depends of each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes and ...

• Cairo
• 5 -Days
• USD-5450
• 01-08-2027

Planning and managing shutdowns, turnarounds and outages in the process plant environment is a complex and demanding function. If turnarounds are not properly planned, managed and controlled, companies run the risks of s ...

• Cairo
• 5 -Days
• USD-5450
• 01-08-2027

Refractories are considered the critical factor for the successful and reliable operation of many high-temperature industrial processes. They are often a major cost item both in general maintenance and also in terms of u ...

• Cairo
• 5 -Days
• USD-5450
• 01-08-2027

Aboveground atmospheric storage tanks store a diverse variety of liquids used in the hydrocarbon processing industry at refineries, chemical plants, and marketing terminals. They are also part of the support facilities i ...