UAE , Dubai |
|||
|---|---|---|---|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
API 580 and 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
.png)
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
.jpg)
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
.jpg)
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
.jpg)
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
.jpg)
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deterio ... |
|
Register |
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
.jpg)
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
.jpg)
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
.jpg)
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
.jpg)
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
.jpg){kind=spacer}
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
.jpg)
|
Read More |
|
Register |
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
.jpg)
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
.png)
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
.jpg)
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
.jpeg)
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
.jpg)
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
.jpg)
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deterio ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Read More |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
.jpg)
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
.jpg)
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
.jpg)
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
API 580 and 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
Malaysia , Kuala-Lumpur |
|||
|---|---|---|---|
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Read More |
|
Register |
|
|
API 580 and 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deterio ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
Morocco , Casablanca |
|||
|---|---|---|---|
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
Turkey , Istanbul |
|||
|---|---|---|---|
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deterio ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
API 580 and 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Read More |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
Jordan , Amman |
|||
|---|---|---|---|
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
|
Design & Fabrication of Pressure Vessels, Repairs & AlterationsThis comprehensive course, through the use of examples, case studies and group workshop problem solving, and the extensive professional experience of the instructors, deals with the design, fabrication, inspection, repai ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory Course (API 653)American Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
API 580 and 581 Training - Risk-Based Inspection & Base Resource DocumentThe course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue comp ... |
|
Register |
|
|
Facilities Management Specialist,The Complete Course on Facilities ManagementThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing Requirements for Pressure VesselsBased on the ASME Code Section VIII, pressure vessels are containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source, or by the application of heat from ... |
|
Register |
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
Egypt , Cairo |
|||
|---|---|---|---|
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Protective Coatings Specialist PCS 1 Basic PrinciplesPCS 1 Basic Principles provides an introduction of coatings and linings used to control corrosion as well as the economic benefits of managing them. This course defines and examines common coatings used for corrosion con ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deterio ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of FailuresThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Pressure Vessels II Design & Fabrication (Conforms to ASME Codes)This comprehensive course covers the 2007 Edition of the ASME Code, Section VIII: Division 2. With this Edition, this Code was totally re-written and updated to the latest technology. Some of the design and fabrication r ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining Industry (API 579-1ASME FFS-1RP 571)Over the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
ASME Section VIII Division 1 and 2 - Pressure Vessel SeriesThis Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Di ... |
|
Register |
Georgia , Cape Town |
|||
|---|---|---|---|
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
Bahrain , Manama |
|||
|---|---|---|---|
|
|
Carbon & Low Alloy Steel Materials for Sour Service (NACE MR0175ISO 15156NACE MR0103)This comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
API 579 Training - Fitness For ServiceFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
NACE International Coatings TechniquesThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
API 653 Training - Tank Inspection, Repair, Alteration, and ReconstructionAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This 5 days ... |
|
Register |
|
|
Planning, Evaluation, Selection, Control & Monitoring of Facility ContractorsIf your organization manages contractors, then your staff need to understand the health and safety issues. This course is the answer. The course will set out clearly the legal responsibilities of all relevant parties and ... |
|
Register |
|
|
Material Selection & Corrosion Control in Petrochemical IndustriesThis course is designed for engineers engaged in the day to day operation and inspection of refinery. It includes, but not limited to, corrosion and inspection engineers, equipment, process, mechanical, inspection and me ... |
|
Register |
|
|
TEMA & HTRI Heat Exchanger Design & Inspection and Cost Saving ManagementThe course provides in depth practical understanding of major proven heat exchanger technologies and “state of art” fouling mitigation technologies. Pro’s and Con’s of several heat exchanger types are presented explained ... |
|
Register |
|
|
An Overview on Corrosion Control in Oil, Gas & WaterThe production of gas and oil is often accompanied by water, either from the formation, from condensation, or from water injected as lift assist. Acid gases, such as hydrogen sulfide (H2S) and carbon dioxide (CO2) are of ... |
|
Register |
|
|
Essentials of Facilities & Support Services ManagementThe facilities management (FM) function continues to evolve, as do the range of responsibilities and the methods employed to deliver services. This course covers the entire FM range, offering the latest thinking in the p ... |
|
Register |
|
|
Advanced Protective Coatings Specialist PCS 2This course provides advanced level technology topics related to protective coatings. Highlights include an in-depth discussion of coatings, their basic chemical properties and any unique considerations for their surface ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
|
|
Metallurgy, Corrosion & Prevention of Failures Material Selection & PropertiesThe first step in safety and reliability of refinery equipment is identifying, understanding, preventing the relevant fail¬ure mechanisms. Corrosion is the primary cause of fail¬ure of components in the process industrie ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
Construction Design & Management CDM Regulations & Best PracticesThis course provides participants with a comprehensive understanding of the requirements of the Construction Design & Management CDM Regulations 2015 and how these should be implemented in practice. The Regulations are p ... |
|
Register |
Oman , Muscat |
|||
|---|---|---|---|
|
|
Project Management for Facilities Managers & ProfessionalsFacilities managers are regularly tasked with the delivery of significant projects for their organizations. These may range from the commissioning of new works, relocating staff to new accommodation, implementing new wor ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
NACE Protective Coatings Techniques& ProceduresThis training course thoroughly and systematically covers every aspect of coatings application and inspection techniques, maintenance and repair procedures. Coatings selection, specifications, applications and relevant i ... |
|
Register |
|
|
Advanced Cathodic Protection Techniques (Specification, Design, Commissioning, Testing & Monitoring)Cathodic protection is a mature technique for controlling corrosion of steel structures immersed in waters, buried in soils and imbedded in concrete. This course thoroughly and systematically covers the fundamental princ ... |
|
Register |
|
|
Corrosion Control, Monitoring & Prevention in Petroleum IndustryMaintaining the ageing of metallic structures such as underground pipelines, vessels, and storage tanks is a challenge to the oil and gas industry worldwide. Understanding why and how corrosion, and corrosion control tec ... |
|
Register |
|
|
API 570 Training - Piping Inspector CourseAmerican Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification ... |
|
Register |
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
Boiler & Pressure Vessel Design& Fabrication of Pressure Vessels (ASME Section VIII)Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
|
|
Welded Tanks for Oil Storage (API 650API 653)The design requirements of API Standard 650 will be explained and their application demonstrated through example problems. Material, fabrication and erection requirements documentation will also be reviewed. The candidat ... |
|
Register |
|
|
Welding Codes & Metallurgy (ASME Section IX)This is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Pressure Vessels ASME and API CodesThis course provides an overview of code organization, editions and addenda. The candidates will learn how to prepare and submit an inquiry to the Code Committee for Code Interpretation, Code Cases or Code revision. It i ... |
|
Register |
|
|
Read More |
|
Register |
|
|
Fitness for Service FFS (API 579-1ASME FFS-1)The American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Industrial Painting and Coating (Internal & External for Pipe Structure, Tanks & Vessels)The pipeline, tanks or vessel coating is the first line of defense against corrosion and cathodic protection is used to control corrosion risks at sites of coating damage. However, some coating systems show failure modes ... |
|
Register |
South Africa , Johannesburg |
|||
|---|---|---|---|
|
|
Corrosion & Its Prevention TechnologiesThis comprehensive corrosion course covers virtually every aspect of corrosion. The course is structured in a flexible modular format so that beginners will establish a strong foothold from the basic modules dealing with ... |
|
Register |
|
|
An Introduction to Facilities Management (FM)This course is an introduction to the FM profession and best practice in day-to-day operations. It is intended for newly appointed staff, or those with less than two years’ operational experience looking to broaden their ... |
|
Register |
|
|
Welding Technology Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
|
|
Coating Inspector Program CIP Level 1 & 2For over 30 years, the NACE Coating Inspector Program has set the standard for inspections in the protective coatings industry and is the world’s most recognized coating inspector certification program. CIP is the first ... |
|
Register |
|
|
API 570 PIPING INSPECTION CODE Inspection, Repair, Alteration & Rerating of In-Service Piping Systems (API Exam Preparation)Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for th ... |
|
Register |
Qatar , Doha |
|||
|---|---|---|---|
|
|
Building & Facilities Preventive Maintenance Strategies, Tools & TechniquesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
|
|
Pipeline Transportation Systems for Liquid Hydrocarbons & Other Liquids (Conforms to ASME Code B31.4)Pipelines play a vital role in our economy. They carry, on daily basis, the liquid heating and motor fuels on which we depend. They draw little public attention until they malfunction and release their contents into the ... |
|
Register |
Saudi Arabia , Jeddah |
|||
|---|---|---|---|
|
|
Professional Facilities & Equipment Management for SpecialistsThis course features how to establish, implement, manage and continually improve your facility department to get the best out of your facilities within the given boundaries of costs, performance and other important facto ... |
|
Register |
|
|
Process Piping Materials, Fabrication, Examination & Testing (Conforms to ASME Code B31.3)This comprehensive course is designed to illustrate the relationship of the Fabrication & Examination rules of the B31.3 Code to the Design and Materials rules. Examples of problems that occur as a result of not underst ... |
|
Register |
|
|
Repair of Pressure Equipment & Piping (Conforms to ASME Codes)This course provides methods for repair of equipment and piping within the scope of ASME Pressure Technology Codes and Standards after it has been placed in service. These repair methods include relevant design, fabricat ... |
|
Register |
|
|
API 571 Damage Mechanisms Affecting Fixed Refining Equipment in the Refining IndustryAPI RP 571-2011 is the latest edition that describes damage mechanisms affecting equipment in the refining and petrochemical industries. A key first step in managing equipment safety and reliability is the identification ... |
|
Register |
|
|
Construction & Inspection Requirements for Pipelines (ASME B31.3CSA Z662)Understand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
United Kingdom , London |
|||
|---|---|---|---|
|
|
Advanced Oil & Gas Handling Surfaces (Level 3)This course is designed to provide the basic knowledge of surface facilities from the wellhead to the custody transfer. The topics covered in the course will facilitate the communication of the subsurface engineers with ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
|
Fundamentals of Welding Engineering (AWSASME)This course is designed for the individual that needs to expand the candidates’ core competence on the subject of welding. Designers, inspectors, managers, or welders with a need to understand the fundamentals of welding ... |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
CDGA keen to selects highly technical instructors based on professional field experience
Since CDGA was established, it considered a training partner for world class oil & gas institution
3012, Block 3, 30 Euro Business Park, Little Island, Co. Cork, T45 V220, Ireland
Mon to Fri 09:00 AM to 06:00 PM
Contact Us anytime!