United Kingdom , London |
|||
|---|---|---|---|
|
Inspection, Assessment & Repair Of Concrete StructureThe assessment of the reinforced concrete structure is now a main challenge to the civil engineer. The repair of the reinforced concrete structures has development in the recent years due to the new technology of the mat ... |
|
Register |
|
Comprehensive Review of Culvert, Open Channel and Storm Sewer DesignChanges in land use affect urban drainage and, therefore, present challenges for engineers who must deal with drainage planning, runoff analysis, storm sewer hydraulics, and watercourse drainage within the government reg ... |
|
Register |
|
Advanced Concrete TechnologyThere have been rapid advances in concrete technology during the past three decades or so. The improvement in strength and other structural properties achieved earlier through the use of steel reinforcement are now accep ... |
|
Register |
Egypt , Cairo |
|||
|---|---|---|---|
|
Concrete Structural Design for IndustrialConcrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be discussed in s ... |
|
Register |
|
Buildings & Facilities Preventive Maintenance Best PracticesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
Construction Risk ManagementThis course addresses the critical survival and profitability factors for companies managing projects in the construction industry in an economic environment characterized by uncertainty and change. Subjects covered incl ... |
|
Register |
|
Construction Site Management & SupervisionConstruction site management mainly involves the rational layout of site facilities, optimum usage of space and dynamic management of plants. It directly influences security, machine running, material supply and power di ... |
|
Register |
|
Economics Development & Planning for Construction ProjectsThis course identifies economic factors that significantly influence construction projects. The objective is to introduce participants to the application of various economic analysis techniques such as project feasibilit ... |
|
Register |
|
Advanced Inspection, Assessment and Repair of Concrete StructureThis course is intended for civil, construction engineers and inspectors who are interested in the area of inspection, assessment and repair of concrete structures. This course enables delegates already familiar with wha ... |
|
Register |
|
IRF Road Construction & MaintenanceAs a country develops and treads in the globalization era, it demands the use of more sophisticated technology to assist in its development process, particularly in the area of engineering. This course is designed for pe ... |
|
Register |
|
Project Decision Making in the Oil & Gas IndustryDoes your project organization’s decisions provide clear guidance to future projects? Today, large projects in the oil and gas industry face daunting challenges as they become increasingly complex, innovative and technol ... |
|
Register |
|
Construction Supervision SkillsThe construction industry represents one of the main industries in the world by general and especially in the developed countries, was the achievements of this industry like: areas construction, the energy provision, the ... |
|
Register |
|
Advanced Steel Structure Design & Construction For Oil & Gas & Petrochemical IndustrySteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
Geographical and Mapping Information Management System Theory and Practice SoftwareThis course describes tasks and issues that project managers must address at different stages of GIS project development by striking a balance between theory and practice. Topics include strategic planning, work program ... |
|
Register |
|
Advanced Materials & Technology in Concrete IndustryConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
Structural Design for Non Structural EngineersArchitects and non-structural engineers often work together with structural engineers on design projects. An understanding of the basic concepts of structural engineering could make their jobs easier. If you are involved ... |
|
Register |
|
Advanced Analysis of Staad Pro WorkshopThis course provides a precise look over STAAD Pro Design of sections (both concrete design and steel design). It demonstrates the steps to be followed to produce structural analysis and design of any type of buildings ... |
|
Register |
|
Project Quality Management MasterclassIn today’s fiercely competitive and fast changing business environment, delivery of high quality project outcomes is the key to organizations’ survival and prosperity. Managers are constantly seeking to produce good qual ... |
|
Register |
|
|
Concrete Structural Design for IndustrialConcrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be discussed in s ... |
|
Register |
.png)
|
Introduction to geographic information systems (GIS)This course introduces the hardware and software components of a Geographic Information Systems and reviews GIS applications. Topics include data structures and basic functions, methods of data capture and sources of dat ... |
|
Register |
|
Road construction materials and construction technologiesAn innovative highway industry provides a major market for the use of 'waste’ resources, at the same time minimizing the need for 'natural’ resources. Selected waste streams and industrial by-products, formerly bound for ... |
|
Register |
|
Designing and analyzing Water Networks & Pumping StationsThe Course provides a snap-shot of current research in the field of on-line monitoring and control of clean and untreated water systems. The latest techniques in modelling drinking water quality and river quality are pr ... |
|
Register |
|
Building Upgrading and Repair, After the AssessmentAs buildings and structures age owners often rely upon engineers to perform building condition assessments to help them make the decision on the action necessary to upgrade or repair the structures. |
|
Register |
|
Construction Cost & Value ManagementConstruction project cost and economic value management are two critical competencies of construction project managers that are instrumental in achieving customer satisfaction. Accurate cost estimates form the essential ... |
|
Register |
|
|
Advanced Concrete TechnologyThere have been rapid advances in concrete technology during the past three decades or so. The improvement in strength and other structural properties achieved earlier through the use of steel reinforcement are now accep ... |
|
Register |
|
Green Building Design , Construction Techniques and ImplementationThe green building is the new philosophy to design, construct and operating the different types of the buildings Whole building commissioning is also developed in USA match with the design and implement green building. ... |
|
Register |
|
Construction Quality Control & Quality AssuranceIn this course you will learn the respon¬sibility of QA/QC in the construction in¬dustry specifically and direct to the point, how to develop quality plan, method statement, inspect, audit and engage root cause analysis ... |
|
Register |
|
Structure for Non Structural EngineersConstruction is the largest industry in the world and anything constructed needs to be designed first. Structural Engineering deals with the analysis and design aspects, the basic purpose of which is to ensure a safe, fu ... |
|
Register |
|
Basic Design of Concrete Foundation & Soil InvestigationConcrete is widely used for making architectural structures, foundations, brick, block walls, pavements, bridges, overpasses, highways, runways, parking structures, dams, pools, reservoirs, pipes, footings for gates, fen ... |
|
Register |
|
Designing of Blast Resistance BuildingsThis Design Blast Resistance Buildings for Oil & Gas Field training course will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ... |
|
Register |
|
Construction Project Planning & IntegrationThis course addresses the methodologies, tools and techniques to plan, implement, and integrate construction projects. It covers various aspects of pre-construction planning techniques such as line of balance, bar charts ... |
|
Register |
|
Structural Reliability Analysis and design in Civil EngineeringEfficient structural design of industrial facilities requires engineers to possess integrated knowledge of theories and practices. It is essential to understand the issues that can impact stability, safety, and serviceab ... |
|
Register |
|
Leading & Managing Advanced Project ControlIn the Oil & Gas or Petrochemical industries, increased technical and commercial complexity, coping with commercial, environmental and political cost and risk, provides oil and gas megaprojects with an environment of int ... |
|
Register |
UAE , Dubai |
|||
|---|---|---|---|
|
|
Advanced Analysis of Staad Pro WorkshopThis course provides a precise look over STAAD Pro Design of sections (both concrete design and steel design). It demonstrates the steps to be followed to produce structural analysis and design of any type of buildings ... |
|
Register |
|
Modern Structural Renovation of BuildingsThe renovation of the reinforced concrete structures has become common in recent years due to the development in technologies, materials and the techniques for maintenance and repair. This course will present methods for ... |
|
Register |
|
Asphalt Mix Design Training programMaximizing the performance of high quality materials and sophisticated construction practices is best achieved with a thorough understanding of material properties and asphalt mix design. Engineers and technical managers ... |
|
Register |
|
|
Designing of Blast Resistance BuildingsThis Design Blast Resistance Buildings for Oil & Gas Field training course will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ... |
|
Register |
|
Advanced Etabs WorkshopEtabs is a computer aided analysis and design software used to solve the multistoried structures indeterminacy in few seconds by dividing the entire structure into objects with most accuracy, various types of structures ... |
|
Register |
|
Quality Control and Assurance for Concrete and Steel Structure ProjectsThis course is intended for structural and civil engineers who are interested in the quality control and QA with the most recent non-destructive testing for concrete and steel structure. |
|
Register |
|
|
IRF Road Construction & MaintenanceAs a country develops and treads in the globalization era, it demands the use of more sophisticated technology to assist in its development process, particularly in the area of engineering. This course is designed for pe ... |
|
Register |
|
Building Condition AssessmentAs buildings age, those responsible for them must get involved with condition surveys. These individuals have to evaluate materials, conduct destructive or non-destructive tests, evaluate results and decide on the necess ... |
|
Register |
|
|
Construction Project Planning & IntegrationThis course addresses the methodologies, tools and techniques to plan, implement, and integrate construction projects. It covers various aspects of pre-construction planning techniques such as line of balance, bar charts ... |
|
Register |
|
|
Structural Reliability Analysis and design in Civil EngineeringEfficient structural design of industrial facilities requires engineers to possess integrated knowledge of theories and practices. It is essential to understand the issues that can impact stability, safety, and serviceab ... |
|
Register |
|
Structural design for concrete and steelSteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
Flexible and rigid pavement structural designThis course will provide the information necessary to deal with pavement challenges. Participants will examine implications of soils and pavement materials, roadway drainage, and practical techniques for field evaluation ... |
|
Register |
|
Dynamic Analysis for RC Structures Under Dynamic Loading in Petroleum IndustryIn most industrial projects as petroleum industry in general and power generation and also refinery projects. There are many structures affecting by dynamic load due to machines or due to blast load. The design managemen ... |
|
Register |
|
|
Advanced Inspection, Assessment and Repair of Concrete StructureThis course is intended for civil, construction engineers and inspectors who are interested in the area of inspection, assessment and repair of concrete structures. This course enables delegates already familiar with wha ... |
|
Register |
|
|
Designing and analyzing Water Networks & Pumping StationsThe Course provides a snap-shot of current research in the field of on-line monitoring and control of clean and untreated water systems. The latest techniques in modelling drinking water quality and river quality are pr ... |
|
Register |
|
|
Comprehensive Review of Culvert, Open Channel and Storm Sewer DesignChanges in land use affect urban drainage and, therefore, present challenges for engineers who must deal with drainage planning, runoff analysis, storm sewer hydraulics, and watercourse drainage within the government reg ... |
|
Register |
|
Advanced Concrete Technology for Durable and Sustainable Civil InfrastructurePremature deterioration of civil infrastructure has created a colossal backlog of ageing concrete structures. Professionals need to design structures that can exceed their service life even in harsh environments and with ... |
|
Register |
|
|
Construction Cost & Value ManagementConstruction project cost and economic value management are two critical competencies of construction project managers that are instrumental in achieving customer satisfaction. Accurate cost estimates form the essential ... |
|
Register |
|
|
Project Quality Management MasterclassIn today’s fiercely competitive and fast changing business environment, delivery of high quality project outcomes is the key to organizations’ survival and prosperity. Managers are constantly seeking to produce good qual ... |
|
Register |
|
Advanced Civil Concrete TechnologyConcrete technology refers to the process of using concrete in various structures. It can also be defined as the widespread use of concrete globally. The durability and versatility of the concrete material is one of the ... |
|
Register |
|
|
Introduction to geographic information systems (GIS)This course introduces the hardware and software components of a Geographic Information Systems and reviews GIS applications. Topics include data structures and basic functions, methods of data capture and sources of dat ... |
|
Register |
|
Advanced Project & Construction ManagementThis course is an advanced level course building on basic knowledge gained from earlier study and practical experience. It is designed for practicing project managers; construction managers; engineers; surveyors; planner ... |
|
Register |
|
IRF Cement & Concrete TestingConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Advanced Steel Structure Design & Construction For Oil & Gas & Petrochemical IndustrySteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
Construction & Maintenance of Asphalt RoadsThe road transport network of any country plays a vital role in its economy, and the physical condition of its infrastructure is critical. Without adequate and timely maintenance, highways and rural roads alike inexorabl ... |
|
Register |
|
|
Geographical and Mapping Information Management System Theory and Practice SoftwareThis course describes tasks and issues that project managers must address at different stages of GIS project development by striking a balance between theory and practice. Topics include strategic planning, work program ... |
|
Register |
|
A Guide to Basics of ConcreteConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Structural Design for Non Structural EngineersArchitects and non-structural engineers often work together with structural engineers on design projects. An understanding of the basic concepts of structural engineering could make their jobs easier. If you are involved ... |
|
Register |
|
Project Execution Tools & Techniques, Achieving Project SuccessMany organizations execute wide range of Projects and often struggle to implement a consistent approach to Project Execution and ensuring sustainable Project Success. The right Project execution methods and approaches wi ... |
|
Register |
|
Advanced Material, Design & Repair Reinforced Concrete DesignConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
Concrete Structure Designing for Industrial ProjectsReinforced concrete structures are widely used in industrial sector, especially in the onshore oil and gas fields. In industrial projects, the structure design applications are different than normal housing projects taug ... |
|
Register |
|
Construction Cost Estimating and Cost ControlCost estimating is the process of systematically forecasting all costs associated with completing a project within a defined scope. When it comes to construction, construction cost estimating forecasts all of the project ... |
|
Register |
|
Building, Facility Maintenance Contractor “From Award to Completion”Buildings and structures may appear to be static, inert objects. However, in reality they are dynamic – they “move”, “breathe”, age and deteriorate with the passage of time. Unfortunately, they are sometimes designed and ... |
|
Register |
|
IRF Road Maintenance PracticesMaintenance engineers, superintendents and foremen can observe procedures performed in accordance with correct and efficient fundamentals. Road maintenance and repair work will last longer and available funds will go fur ... |
|
Register |
|
Project Control Effective ManagementIn today’s turbulent fast-moving business environment, it is vital that organizations are able to predict the realization of value from their work. One of the most dominant approaches to the generation of value is by usi ... |
|
Register |
|
|
Project Decision Making in the Oil & Gas IndustryDoes your project organization’s decisions provide clear guidance to future projects? Today, large projects in the oil and gas industry face daunting challenges as they become increasingly complex, innovative and technol ... |
|
Register |
|
Construction ManagementThis program covers application of construction management techniques related to the unique nature of construction projects. Looks at elements of construction management, construction delivery systems, partnering and sub ... |
|
Register |
|
Design of Urban Drainage and Stormwater Management Facilities WorkshopTo design an effective urban drainage and stormwater management system, knowledge of the technical design principles for each component of the system is required. After a brief refresher of basic hydrology, this seminar ... |
|
Register |
|
|
Structure for Non Structural EngineersConstruction is the largest industry in the world and anything constructed needs to be designed first. Structural Engineering deals with the analysis and design aspects, the basic purpose of which is to ensure a safe, fu ... |
|
Register |
|
|
Road construction materials and construction technologiesAn innovative highway industry provides a major market for the use of 'waste’ resources, at the same time minimizing the need for 'natural’ resources. Selected waste streams and industrial by-products, formerly bound for ... |
|
Register |
|
IRF Construction InspectionConstruction inspectors review the construction of drainage systems, homes, buildings and highways to ensure that all building, health and safety codes are followed. This program is for use in training of road constructi ... |
|
Register |
|
Blast Resistance Buildings for Oil and Gas fieldThe design management procedure for industrial projects will be clarified. All the load that affect the structure building in oil and gas facilities will be illustrated. The concrete and steel structure design principal ... |
|
Register |
|
Structural design of building to prevent progressive collapseDesign of building to resist progressive collapse became an essential topic especially for building with high importance. After 9/11 many specified codes and guidelines were issued specially in USA. For contemporary stru ... |
|
Register |
|
Overview and up-to-date Structure Analysis and Design for Concrete BuildingsThis course provides the basics structure analysis and design of reinforced concrete structures. Moreover the attendees will be aware of update technology for the modern technique in structure analysis and design for the ... |
|
Register |
|
|
Building Condition AssessmentAs buildings age, those responsible for them must get involved with condition surveys. These individuals have to evaluate materials, conduct destructive or non-destructive tests, evaluate results and decide on the necess ... |
|
Register |
|
|
Advanced Project & Construction ManagementThis course is an advanced level course building on basic knowledge gained from earlier study and practical experience. It is designed for practicing project managers; construction managers; engineers; surveyors; planner ... |
|
Register |
|
|
Project Quality Management MasterclassIn today’s fiercely competitive and fast changing business environment, delivery of high quality project outcomes is the key to organizations’ survival and prosperity. Managers are constantly seeking to produce good qual ... |
|
Register |
|
|
Structure for Non Structural EngineersConstruction is the largest industry in the world and anything constructed needs to be designed first. Structural Engineering deals with the analysis and design aspects, the basic purpose of which is to ensure a safe, fu ... |
|
Register |
|
|
Structural design for concrete and steelSteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
Designing and analyzing Water Networks & Pumping StationsThe Course provides a snap-shot of current research in the field of on-line monitoring and control of clean and untreated water systems. The latest techniques in modelling drinking water quality and river quality are pr ... |
|
Register |
|
|
Flexible and rigid pavement structural designThis course will provide the information necessary to deal with pavement challenges. Participants will examine implications of soils and pavement materials, roadway drainage, and practical techniques for field evaluation ... |
|
Register |
|
Structural Design of Industrial BuildingsThe efficient structural design of industrial facilities requires engineers to understand the issues that can affect stability, safety, and serviceability. This course covers the structural design of industrial facilitie ... |
|
Register |
|
|
Advanced Material, Design & Repair Reinforced Concrete DesignConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
|
A Guide to Basics of ConcreteConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
IRF Cement & Concrete TestingConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Concrete Structural Design for IndustrialConcrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be discussed in s ... |
|
Register |
|
|
Economics Development & Planning for Construction ProjectsThis course identifies economic factors that significantly influence construction projects. The objective is to introduce participants to the application of various economic analysis techniques such as project feasibilit ... |
|
Register |
|
|
Design of Urban Drainage and Stormwater Management Facilities WorkshopTo design an effective urban drainage and stormwater management system, knowledge of the technical design principles for each component of the system is required. After a brief refresher of basic hydrology, this seminar ... |
|
Register |
|
|
Construction & Maintenance of Asphalt RoadsThe road transport network of any country plays a vital role in its economy, and the physical condition of its infrastructure is critical. Without adequate and timely maintenance, highways and rural roads alike inexorabl ... |
|
Register |
|
|
Leading & Managing Advanced Project ControlIn the Oil & Gas or Petrochemical industries, increased technical and commercial complexity, coping with commercial, environmental and political cost and risk, provides oil and gas megaprojects with an environment of int ... |
|
Register |
|
|
Project Execution Tools & Techniques, Achieving Project SuccessMany organizations execute wide range of Projects and often struggle to implement a consistent approach to Project Execution and ensuring sustainable Project Success. The right Project execution methods and approaches wi ... |
|
Register |
|
|
IRF Construction InspectionConstruction inspectors review the construction of drainage systems, homes, buildings and highways to ensure that all building, health and safety codes are followed. This program is for use in training of road constructi ... |
|
Register |
|
|
Structural Reliability Analysis and design in Civil EngineeringEfficient structural design of industrial facilities requires engineers to possess integrated knowledge of theories and practices. It is essential to understand the issues that can impact stability, safety, and serviceab ... |
|
Register |
|
|
Designing of Blast Resistance BuildingsThis Design Blast Resistance Buildings for Oil & Gas Field training course will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ... |
|
Register |
|
|
Basic Design of Concrete Foundation & Soil InvestigationConcrete is widely used for making architectural structures, foundations, brick, block walls, pavements, bridges, overpasses, highways, runways, parking structures, dams, pools, reservoirs, pipes, footings for gates, fen ... |
|
Register |
|
|
Advanced Civil Concrete TechnologyConcrete technology refers to the process of using concrete in various structures. It can also be defined as the widespread use of concrete globally. The durability and versatility of the concrete material is one of the ... |
|
Register |
|
|
Overview and up-to-date Structure Analysis and Design for Concrete BuildingsThis course provides the basics structure analysis and design of reinforced concrete structures. Moreover the attendees will be aware of update technology for the modern technique in structure analysis and design for the ... |
|
Register |
|
Stormwater Management - Design, Inspection and Operation,Maintenance of Stormwater Control FacilitiesThe success of a long-term cost effective operation of a stormwater management facility depends on the 1) appropriate design, 2) an efficient inspection program undertaken during the construction phase and 3) the adoptio ... |
|
Register |
|
|
Introduction to geographic information systems (GIS)This course introduces the hardware and software components of a Geographic Information Systems and reviews GIS applications. Topics include data structures and basic functions, methods of data capture and sources of dat ... |
|
Register |
|
|
Structural design of building to prevent progressive collapseDesign of building to resist progressive collapse became an essential topic especially for building with high importance. After 9/11 many specified codes and guidelines were issued specially in USA. For contemporary stru ... |
|
Register |
|
|
Construction Cost Estimating and Cost ControlCost estimating is the process of systematically forecasting all costs associated with completing a project within a defined scope. When it comes to construction, construction cost estimating forecasts all of the project ... |
|
Register |
|
|
Construction Project Planning & IntegrationThis course addresses the methodologies, tools and techniques to plan, implement, and integrate construction projects. It covers various aspects of pre-construction planning techniques such as line of balance, bar charts ... |
|
Register |
|
|
Construction Site Management & SupervisionConstruction site management mainly involves the rational layout of site facilities, optimum usage of space and dynamic management of plants. It directly influences security, machine running, material supply and power di ... |
|
Register |
|
|
Modern Structural Renovation of BuildingsThe renovation of the reinforced concrete structures has become common in recent years due to the development in technologies, materials and the techniques for maintenance and repair. This course will present methods for ... |
|
Register |
|
|
Road construction materials and construction technologiesAn innovative highway industry provides a major market for the use of 'waste’ resources, at the same time minimizing the need for 'natural’ resources. Selected waste streams and industrial by-products, formerly bound for ... |
|
Register |
|
|
Buildings & Facilities Preventive Maintenance Best PracticesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Green Building Design , Construction Techniques and ImplementationThe green building is the new philosophy to design, construct and operating the different types of the buildings Whole building commissioning is also developed in USA match with the design and implement green building. ... |
|
Register |
|
|
Advanced Concrete TechnologyThere have been rapid advances in concrete technology during the past three decades or so. The improvement in strength and other structural properties achieved earlier through the use of steel reinforcement are now accep ... |
|
Register |
|
Managing Successful Projects in the Oil & Gas IndustryProjects within the Oil & Gas sector face many prominent issues and the challenge of delivering projects has become more and more difficult. The challenges are increasingly complex; delivering innovative and technologica ... |
|
Register |
|
|
IRF Road Maintenance PracticesMaintenance engineers, superintendents and foremen can observe procedures performed in accordance with correct and efficient fundamentals. Road maintenance and repair work will last longer and available funds will go fur ... |
|
Register |
|
|
Construction ManagementThis program covers application of construction management techniques related to the unique nature of construction projects. Looks at elements of construction management, construction delivery systems, partnering and sub ... |
|
Register |
|
Civil Modern Concrete TechnologyConcrete is a composite with properties that change with time. During service, the quality of concrete provided by initial curing can be improved by subsequent wetting as in the cases of foundations or water retaining st ... |
|
Register |
|
|
Construction Risk ManagementThis course addresses the critical survival and profitability factors for companies managing projects in the construction industry in an economic environment characterized by uncertainty and change. Subjects covered incl ... |
|
Register |
|
|
Concrete Structure Designing for Industrial ProjectsReinforced concrete structures are widely used in industrial sector, especially in the onshore oil and gas fields. In industrial projects, the structure design applications are different than normal housing projects taug ... |
|
Register |
|
|
Advanced Inspection, Assessment and Repair of Concrete StructureThis course is intended for civil, construction engineers and inspectors who are interested in the area of inspection, assessment and repair of concrete structures. This course enables delegates already familiar with wha ... |
|
Register |
|
Construction Project Procurement ManagementThis course addresses the regulatory aspects of construction projects and covers procurement processes, focusing on acquisition of materials, equipment, labor and professional services. It covers contracts and associated ... |
|
Register |
|
|
Asphalt Mix Design Training programMaximizing the performance of high quality materials and sophisticated construction practices is best achieved with a thorough understanding of material properties and asphalt mix design. Engineers and technical managers ... |
|
Register |
|
|
Project Control Effective ManagementIn today’s turbulent fast-moving business environment, it is vital that organizations are able to predict the realization of value from their work. One of the most dominant approaches to the generation of value is by usi ... |
|
Register |
|
|
Construction Cost & Value ManagementConstruction project cost and economic value management are two critical competencies of construction project managers that are instrumental in achieving customer satisfaction. Accurate cost estimates form the essential ... |
|
Register |
|
|
Advanced Materials & Technology in Concrete IndustryConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
|
Construction Supervision SkillsThe construction industry represents one of the main industries in the world by general and especially in the developed countries, was the achievements of this industry like: areas construction, the energy provision, the ... |
|
Register |
|
|
Building Upgrading and Repair, After the AssessmentAs buildings and structures age owners often rely upon engineers to perform building condition assessments to help them make the decision on the action necessary to upgrade or repair the structures. |
|
Register |
|
|
Quality Control and Assurance for Concrete and Steel Structure ProjectsThis course is intended for structural and civil engineers who are interested in the quality control and QA with the most recent non-destructive testing for concrete and steel structure. |
|
Register |
|
|
IRF Road Construction & MaintenanceAs a country develops and treads in the globalization era, it demands the use of more sophisticated technology to assist in its development process, particularly in the area of engineering. This course is designed for pe ... |
|
Register |
|
|
Advanced Steel Structure Design & Construction For Oil & Gas & Petrochemical IndustrySteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
Project Decision Making in the Oil & Gas IndustryDoes your project organization’s decisions provide clear guidance to future projects? Today, large projects in the oil and gas industry face daunting challenges as they become increasingly complex, innovative and technol ... |
|
Register |
|
Water Transport and DistributionThe Water Transport and Distribution short course from CDGA introduces participants to the basics of planning, hydraulic- and engineering design, construction, operation and maintenance of water transport and distributio ... |
|
Register |
|
|
Construction Quality Control & Quality AssuranceIn this course you will learn the respon¬sibility of QA/QC in the construction in¬dustry specifically and direct to the point, how to develop quality plan, method statement, inspect, audit and engage root cause analysis ... |
|
Register |
|
|
Building, Facility Maintenance Contractor “From Award to Completion”Buildings and structures may appear to be static, inert objects. However, in reality they are dynamic – they “move”, “breathe”, age and deteriorate with the passage of time. Unfortunately, they are sometimes designed and ... |
|
Register |
|
|
Comprehensive Review of Culvert, Open Channel and Storm Sewer DesignChanges in land use affect urban drainage and, therefore, present challenges for engineers who must deal with drainage planning, runoff analysis, storm sewer hydraulics, and watercourse drainage within the government reg ... |
|
Register |
|
|
Geographical and Mapping Information Management System Theory and Practice SoftwareThis course describes tasks and issues that project managers must address at different stages of GIS project development by striking a balance between theory and practice. Topics include strategic planning, work program ... |
|
Register |
|
|
Blast Resistance Buildings for Oil and Gas fieldThe design management procedure for industrial projects will be clarified. All the load that affect the structure building in oil and gas facilities will be illustrated. The concrete and steel structure design principal ... |
|
Register |
|
Structural Steel Design and Construction by European codeSteel is the most used construction material in the USA and Europe for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable ... |
|
Register |
|
|
Structural Design for Non Structural EngineersArchitects and non-structural engineers often work together with structural engineers on design projects. An understanding of the basic concepts of structural engineering could make their jobs easier. If you are involved ... |
|
Register |
|
|
Advanced Etabs WorkshopEtabs is a computer aided analysis and design software used to solve the multistoried structures indeterminacy in few seconds by dividing the entire structure into objects with most accuracy, various types of structures ... |
|
Register |
|
The Construction Industry OverviewThe construction industry is the largest industry in the world. It is more of a service than a manufacturing industry. Growth in this industry in fact is an indicator of the economic conditions of a country. This is beca ... |
|
Register |
|
|
Advanced Analysis of Staad Pro WorkshopThis course provides a precise look over STAAD Pro Design of sections (both concrete design and steel design). It demonstrates the steps to be followed to produce structural analysis and design of any type of buildings ... |
|
Register |
|
|
Inspection, Assessment & Repair Of Concrete StructureThe assessment of the reinforced concrete structure is now a main challenge to the civil engineer. The repair of the reinforced concrete structures has development in the recent years due to the new technology of the mat ... |
|
Register |
|
Concrete Structural DesignReinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength , serviceability and robustness will be di ... |
|
Register |
|
|
Dynamic Analysis for RC Structures Under Dynamic Loading in Petroleum IndustryIn most industrial projects as petroleum industry in general and power generation and also refinery projects. There are many structures affecting by dynamic load due to machines or due to blast load. The design managemen ... |
|
Register |
|
|
Advanced Concrete Technology for Durable and Sustainable Civil InfrastructurePremature deterioration of civil infrastructure has created a colossal backlog of ageing concrete structures. Professionals need to design structures that can exceed their service life even in harsh environments and with ... |
|
Register |
|
|
Structure for Non Structural EngineersConstruction is the largest industry in the world and anything constructed needs to be designed first. Structural Engineering deals with the analysis and design aspects, the basic purpose of which is to ensure a safe, fu ... |
|
Register |
|
|
Flexible and rigid pavement structural designThis course will provide the information necessary to deal with pavement challenges. Participants will examine implications of soils and pavement materials, roadway drainage, and practical techniques for field evaluation ... |
|
Register |
|
|
Structural design for concrete and steelSteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
Building Condition AssessmentAs buildings age, those responsible for them must get involved with condition surveys. These individuals have to evaluate materials, conduct destructive or non-destructive tests, evaluate results and decide on the necess ... |
|
Register |
|
|
Project Quality Management MasterclassIn today’s fiercely competitive and fast changing business environment, delivery of high quality project outcomes is the key to organizations’ survival and prosperity. Managers are constantly seeking to produce good qual ... |
|
Register |
|
|
Construction Cost Estimating and Cost ControlCost estimating is the process of systematically forecasting all costs associated with completing a project within a defined scope. When it comes to construction, construction cost estimating forecasts all of the project ... |
|
Register |
|
|
Advanced Project & Construction ManagementThis course is an advanced level course building on basic knowledge gained from earlier study and practical experience. It is designed for practicing project managers; construction managers; engineers; surveyors; planner ... |
|
Register |
|
|
Road construction materials and construction technologiesAn innovative highway industry provides a major market for the use of 'waste’ resources, at the same time minimizing the need for 'natural’ resources. Selected waste streams and industrial by-products, formerly bound for ... |
|
Register |
|
|
Basic Design of Concrete Foundation & Soil InvestigationConcrete is widely used for making architectural structures, foundations, brick, block walls, pavements, bridges, overpasses, highways, runways, parking structures, dams, pools, reservoirs, pipes, footings for gates, fen ... |
|
Register |
|
|
Overview and up-to-date Structure Analysis and Design for Concrete BuildingsThis course provides the basics structure analysis and design of reinforced concrete structures. Moreover the attendees will be aware of update technology for the modern technique in structure analysis and design for the ... |
|
Register |
|
|
Concrete Structure Designing for Industrial ProjectsReinforced concrete structures are widely used in industrial sector, especially in the onshore oil and gas fields. In industrial projects, the structure design applications are different than normal housing projects taug ... |
|
Register |
|
|
Leading & Managing Advanced Project ControlIn the Oil & Gas or Petrochemical industries, increased technical and commercial complexity, coping with commercial, environmental and political cost and risk, provides oil and gas megaprojects with an environment of int ... |
|
Register |
|
|
Construction Project Planning & IntegrationThis course addresses the methodologies, tools and techniques to plan, implement, and integrate construction projects. It covers various aspects of pre-construction planning techniques such as line of balance, bar charts ... |
|
Register |
|
|
Structural Reliability Analysis and design in Civil EngineeringEfficient structural design of industrial facilities requires engineers to possess integrated knowledge of theories and practices. It is essential to understand the issues that can impact stability, safety, and serviceab ... |
|
Register |
|
|
A Guide to Basics of ConcreteConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Economics Development & Planning for Construction ProjectsThis course identifies economic factors that significantly influence construction projects. The objective is to introduce participants to the application of various economic analysis techniques such as project feasibilit ... |
|
Register |
|
|
Stormwater Management - Design, Inspection and Operation,Maintenance of Stormwater Control FacilitiesThe success of a long-term cost effective operation of a stormwater management facility depends on the 1) appropriate design, 2) an efficient inspection program undertaken during the construction phase and 3) the adoptio ... |
|
Register |
|
|
Designing of Blast Resistance BuildingsThis Design Blast Resistance Buildings for Oil & Gas Field training course will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ... |
|
Register |
|
|
Structural design of building to prevent progressive collapseDesign of building to resist progressive collapse became an essential topic especially for building with high importance. After 9/11 many specified codes and guidelines were issued specially in USA. For contemporary stru ... |
|
Register |
|
|
Construction & Maintenance of Asphalt RoadsThe road transport network of any country plays a vital role in its economy, and the physical condition of its infrastructure is critical. Without adequate and timely maintenance, highways and rural roads alike inexorabl ... |
|
Register |
|
|
Concrete Structural Design for IndustrialConcrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be discussed in s ... |
|
Register |
|
|
Construction Cost & Value ManagementConstruction project cost and economic value management are two critical competencies of construction project managers that are instrumental in achieving customer satisfaction. Accurate cost estimates form the essential ... |
|
Register |
|
|
Designing and analyzing Water Networks & Pumping StationsThe Course provides a snap-shot of current research in the field of on-line monitoring and control of clean and untreated water systems. The latest techniques in modelling drinking water quality and river quality are pr ... |
|
Register |
|
|
Advanced Civil Concrete TechnologyConcrete technology refers to the process of using concrete in various structures. It can also be defined as the widespread use of concrete globally. The durability and versatility of the concrete material is one of the ... |
|
Register |
|
|
Construction Project Procurement ManagementThis course addresses the regulatory aspects of construction projects and covers procurement processes, focusing on acquisition of materials, equipment, labor and professional services. It covers contracts and associated ... |
|
Register |
|
|
Building Upgrading and Repair, After the AssessmentAs buildings and structures age owners often rely upon engineers to perform building condition assessments to help them make the decision on the action necessary to upgrade or repair the structures. |
|
Register |
|
|
IRF Road Maintenance PracticesMaintenance engineers, superintendents and foremen can observe procedures performed in accordance with correct and efficient fundamentals. Road maintenance and repair work will last longer and available funds will go fur ... |
|
Register |
|
|
Civil Modern Concrete TechnologyConcrete is a composite with properties that change with time. During service, the quality of concrete provided by initial curing can be improved by subsequent wetting as in the cases of foundations or water retaining st ... |
|
Register |
|
|
IRF Road Construction & MaintenanceAs a country develops and treads in the globalization era, it demands the use of more sophisticated technology to assist in its development process, particularly in the area of engineering. This course is designed for pe ... |
|
Register |
|
|
Advanced Inspection, Assessment and Repair of Concrete StructureThis course is intended for civil, construction engineers and inspectors who are interested in the area of inspection, assessment and repair of concrete structures. This course enables delegates already familiar with wha ... |
|
Register |
|
|
Construction Supervision SkillsThe construction industry represents one of the main industries in the world by general and especially in the developed countries, was the achievements of this industry like: areas construction, the energy provision, the ... |
|
Register |
|
|
Construction Risk ManagementThis course addresses the critical survival and profitability factors for companies managing projects in the construction industry in an economic environment characterized by uncertainty and change. Subjects covered incl ... |
|
Register |
|
|
Introduction to geographic information systems (GIS)This course introduces the hardware and software components of a Geographic Information Systems and reviews GIS applications. Topics include data structures and basic functions, methods of data capture and sources of dat ... |
|
Register |
|
|
Project Control Effective ManagementIn today’s turbulent fast-moving business environment, it is vital that organizations are able to predict the realization of value from their work. One of the most dominant approaches to the generation of value is by usi ... |
|
Register |
|
|
Advanced Concrete TechnologyThere have been rapid advances in concrete technology during the past three decades or so. The improvement in strength and other structural properties achieved earlier through the use of steel reinforcement are now accep ... |
|
Register |
|
|
Buildings & Facilities Preventive Maintenance Best PracticesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
The Construction Industry OverviewThe construction industry is the largest industry in the world. It is more of a service than a manufacturing industry. Growth in this industry in fact is an indicator of the economic conditions of a country. This is beca ... |
|
Register |
|
|
Structural Design of Industrial BuildingsThe efficient structural design of industrial facilities requires engineers to understand the issues that can affect stability, safety, and serviceability. This course covers the structural design of industrial facilitie ... |
|
Register |
|
|
Asphalt Mix Design Training programMaximizing the performance of high quality materials and sophisticated construction practices is best achieved with a thorough understanding of material properties and asphalt mix design. Engineers and technical managers ... |
|
Register |
|
|
Green Building Design , Construction Techniques and ImplementationThe green building is the new philosophy to design, construct and operating the different types of the buildings Whole building commissioning is also developed in USA match with the design and implement green building. ... |
|
Register |
|
|
Structural Design for Non Structural EngineersArchitects and non-structural engineers often work together with structural engineers on design projects. An understanding of the basic concepts of structural engineering could make their jobs easier. If you are involved ... |
|
Register |
|
|
Construction ManagementThis program covers application of construction management techniques related to the unique nature of construction projects. Looks at elements of construction management, construction delivery systems, partnering and sub ... |
|
Register |
|
|
Advanced Material, Design & Repair Reinforced Concrete DesignConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
|
Inspection, Assessment & Repair Of Concrete StructureThe assessment of the reinforced concrete structure is now a main challenge to the civil engineer. The repair of the reinforced concrete structures has development in the recent years due to the new technology of the mat ... |
|
Register |
|
|
Advanced Materials & Technology in Concrete IndustryConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
|
Managing Successful Projects in the Oil & Gas IndustryProjects within the Oil & Gas sector face many prominent issues and the challenge of delivering projects has become more and more difficult. The challenges are increasingly complex; delivering innovative and technologica ... |
|
Register |
|
|
Project Decision Making in the Oil & Gas IndustryDoes your project organization’s decisions provide clear guidance to future projects? Today, large projects in the oil and gas industry face daunting challenges as they become increasingly complex, innovative and technol ... |
|
Register |
|
|
IRF Construction InspectionConstruction inspectors review the construction of drainage systems, homes, buildings and highways to ensure that all building, health and safety codes are followed. This program is for use in training of road constructi ... |
|
Register |
|
|
Blast Resistance Buildings for Oil and Gas fieldThe design management procedure for industrial projects will be clarified. All the load that affect the structure building in oil and gas facilities will be illustrated. The concrete and steel structure design principal ... |
|
Register |
|
|
Structural Steel Design and Construction by European codeSteel is the most used construction material in the USA and Europe for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable ... |
|
Register |
|
|
Quality Control and Assurance for Concrete and Steel Structure ProjectsThis course is intended for structural and civil engineers who are interested in the quality control and QA with the most recent non-destructive testing for concrete and steel structure. |
|
Register |
|
|
Construction Site Management & SupervisionConstruction site management mainly involves the rational layout of site facilities, optimum usage of space and dynamic management of plants. It directly influences security, machine running, material supply and power di ... |
|
Register |
|
|
Modern Structural Renovation of BuildingsThe renovation of the reinforced concrete structures has become common in recent years due to the development in technologies, materials and the techniques for maintenance and repair. This course will present methods for ... |
|
Register |
|
|
Building, Facility Maintenance Contractor “From Award to Completion”Buildings and structures may appear to be static, inert objects. However, in reality they are dynamic – they “move”, “breathe”, age and deteriorate with the passage of time. Unfortunately, they are sometimes designed and ... |
|
Register |
|
|
Construction Quality Control & Quality AssuranceIn this course you will learn the respon¬sibility of QA/QC in the construction in¬dustry specifically and direct to the point, how to develop quality plan, method statement, inspect, audit and engage root cause analysis ... |
|
Register |
|
|
IRF Cement & Concrete TestingConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Advanced Steel Structure Design & Construction For Oil & Gas & Petrochemical IndustrySteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
Concrete Structural DesignReinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength , serviceability and robustness will be di ... |
|
Register |
|
|
Geographical and Mapping Information Management System Theory and Practice SoftwareThis course describes tasks and issues that project managers must address at different stages of GIS project development by striking a balance between theory and practice. Topics include strategic planning, work program ... |
|
Register |
|
|
Advanced Etabs WorkshopEtabs is a computer aided analysis and design software used to solve the multistoried structures indeterminacy in few seconds by dividing the entire structure into objects with most accuracy, various types of structures ... |
|
Register |
|
|
Water Transport and DistributionThe Water Transport and Distribution short course from CDGA introduces participants to the basics of planning, hydraulic- and engineering design, construction, operation and maintenance of water transport and distributio ... |
|
Register |
|
|
Advanced Analysis of Staad Pro WorkshopThis course provides a precise look over STAAD Pro Design of sections (both concrete design and steel design). It demonstrates the steps to be followed to produce structural analysis and design of any type of buildings ... |
|
Register |
|
|
Dynamic Analysis for RC Structures Under Dynamic Loading in Petroleum IndustryIn most industrial projects as petroleum industry in general and power generation and also refinery projects. There are many structures affecting by dynamic load due to machines or due to blast load. The design managemen ... |
|
Register |
|
|
Comprehensive Review of Culvert, Open Channel and Storm Sewer DesignChanges in land use affect urban drainage and, therefore, present challenges for engineers who must deal with drainage planning, runoff analysis, storm sewer hydraulics, and watercourse drainage within the government reg ... |
|
Register |
|
|
Design of Urban Drainage and Stormwater Management Facilities WorkshopTo design an effective urban drainage and stormwater management system, knowledge of the technical design principles for each component of the system is required. After a brief refresher of basic hydrology, this seminar ... |
|
Register |
|
|
Project Execution Tools & Techniques, Achieving Project SuccessMany organizations execute wide range of Projects and often struggle to implement a consistent approach to Project Execution and ensuring sustainable Project Success. The right Project execution methods and approaches wi ... |
|
Register |
|
|
Advanced Concrete Technology for Durable and Sustainable Civil InfrastructurePremature deterioration of civil infrastructure has created a colossal backlog of ageing concrete structures. Professionals need to design structures that can exceed their service life even in harsh environments and with ... |
|
Register |
Jordan , Amman |
|||
|---|---|---|---|
|
|
Stormwater Management - Design, Inspection and Operation,Maintenance of Stormwater Control FacilitiesThe success of a long-term cost effective operation of a stormwater management facility depends on the 1) appropriate design, 2) an efficient inspection program undertaken during the construction phase and 3) the adoptio ... |
|
Register |
|
|
Construction Supervision SkillsThe construction industry represents one of the main industries in the world by general and especially in the developed countries, was the achievements of this industry like: areas construction, the energy provision, the ... |
|
Register |
|
|
The Construction Industry OverviewThe construction industry is the largest industry in the world. It is more of a service than a manufacturing industry. Growth in this industry in fact is an indicator of the economic conditions of a country. This is beca ... |
|
Register |
|
|
Basic Design of Concrete Foundation & Soil InvestigationConcrete is widely used for making architectural structures, foundations, brick, block walls, pavements, bridges, overpasses, highways, runways, parking structures, dams, pools, reservoirs, pipes, footings for gates, fen ... |
|
Register |
|
|
Civil Modern Concrete TechnologyConcrete is a composite with properties that change with time. During service, the quality of concrete provided by initial curing can be improved by subsequent wetting as in the cases of foundations or water retaining st ... |
|
Register |
|
|
Managing Successful Projects in the Oil & Gas IndustryProjects within the Oil & Gas sector face many prominent issues and the challenge of delivering projects has become more and more difficult. The challenges are increasingly complex; delivering innovative and technologica ... |
|
Register |
|
|
Project Control Effective ManagementIn today’s turbulent fast-moving business environment, it is vital that organizations are able to predict the realization of value from their work. One of the most dominant approaches to the generation of value is by usi ... |
|
Register |
|
|
Concrete Structure Designing for Industrial ProjectsReinforced concrete structures are widely used in industrial sector, especially in the onshore oil and gas fields. In industrial projects, the structure design applications are different than normal housing projects taug ... |
|
Register |
|
|
Dynamic Analysis for RC Structures Under Dynamic Loading in Petroleum IndustryIn most industrial projects as petroleum industry in general and power generation and also refinery projects. There are many structures affecting by dynamic load due to machines or due to blast load. The design managemen ... |
|
Register |
|
|
Advanced Etabs WorkshopEtabs is a computer aided analysis and design software used to solve the multistoried structures indeterminacy in few seconds by dividing the entire structure into objects with most accuracy, various types of structures ... |
|
Register |
|
|
Structure for Non Structural EngineersConstruction is the largest industry in the world and anything constructed needs to be designed first. Structural Engineering deals with the analysis and design aspects, the basic purpose of which is to ensure a safe, fu ... |
|
Register |
|
|
Flexible and rigid pavement structural designThis course will provide the information necessary to deal with pavement challenges. Participants will examine implications of soils and pavement materials, roadway drainage, and practical techniques for field evaluation ... |
|
Register |
|
|
Structural Design of Industrial BuildingsThe efficient structural design of industrial facilities requires engineers to understand the issues that can affect stability, safety, and serviceability. This course covers the structural design of industrial facilitie ... |
|
Register |
|
|
IRF Cement & Concrete TestingConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Buildings & Facilities Preventive Maintenance Best PracticesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Structural design of building to prevent progressive collapseDesign of building to resist progressive collapse became an essential topic especially for building with high importance. After 9/11 many specified codes and guidelines were issued specially in USA. For contemporary stru ... |
|
Register |
|
|
Construction Site Management & SupervisionConstruction site management mainly involves the rational layout of site facilities, optimum usage of space and dynamic management of plants. It directly influences security, machine running, material supply and power di ... |
|
Register |
|
|
Construction Project Planning & IntegrationThis course addresses the methodologies, tools and techniques to plan, implement, and integrate construction projects. It covers various aspects of pre-construction planning techniques such as line of balance, bar charts ... |
|
Register |
|
|
IRF Road Maintenance PracticesMaintenance engineers, superintendents and foremen can observe procedures performed in accordance with correct and efficient fundamentals. Road maintenance and repair work will last longer and available funds will go fur ... |
|
Register |
|
|
Asphalt Mix Design Training programMaximizing the performance of high quality materials and sophisticated construction practices is best achieved with a thorough understanding of material properties and asphalt mix design. Engineers and technical managers ... |
|
Register |
|
|
Modern Structural Renovation of BuildingsThe renovation of the reinforced concrete structures has become common in recent years due to the development in technologies, materials and the techniques for maintenance and repair. This course will present methods for ... |
|
Register |
|
|
Quality Control and Assurance for Concrete and Steel Structure ProjectsThis course is intended for structural and civil engineers who are interested in the quality control and QA with the most recent non-destructive testing for concrete and steel structure. |
|
Register |
|
|
Advanced Analysis of Staad Pro WorkshopThis course provides a precise look over STAAD Pro Design of sections (both concrete design and steel design). It demonstrates the steps to be followed to produce structural analysis and design of any type of buildings ... |
|
Register |
|
|
Building Condition AssessmentAs buildings age, those responsible for them must get involved with condition surveys. These individuals have to evaluate materials, conduct destructive or non-destructive tests, evaluate results and decide on the necess ... |
|
Register |
|
|
Advanced Project & Construction ManagementThis course is an advanced level course building on basic knowledge gained from earlier study and practical experience. It is designed for practicing project managers; construction managers; engineers; surveyors; planner ... |
|
Register |
|
|
Stormwater Management - Design, Inspection and Operation,Maintenance of Stormwater Control FacilitiesThe success of a long-term cost effective operation of a stormwater management facility depends on the 1) appropriate design, 2) an efficient inspection program undertaken during the construction phase and 3) the adoptio ... |
|
Register |
Turkey , Istanbul |
|||
|---|---|---|---|
|
|
Concrete Structural DesignReinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength , serviceability and robustness will be di ... |
|
Register |
|
|
Construction ManagementThis program covers application of construction management techniques related to the unique nature of construction projects. Looks at elements of construction management, construction delivery systems, partnering and sub ... |
|
Register |
|
|
Building Upgrading and Repair, After the AssessmentAs buildings and structures age owners often rely upon engineers to perform building condition assessments to help them make the decision on the action necessary to upgrade or repair the structures. |
|
Register |
|
|
Asphalt Mix Design Training programMaximizing the performance of high quality materials and sophisticated construction practices is best achieved with a thorough understanding of material properties and asphalt mix design. Engineers and technical managers ... |
|
Register |
|
|
IRF Road Maintenance PracticesMaintenance engineers, superintendents and foremen can observe procedures performed in accordance with correct and efficient fundamentals. Road maintenance and repair work will last longer and available funds will go fur ... |
|
Register |
|
|
The Construction Industry OverviewThe construction industry is the largest industry in the world. It is more of a service than a manufacturing industry. Growth in this industry in fact is an indicator of the economic conditions of a country. This is beca ... |
|
Register |
|
|
Project Execution Tools & Techniques, Achieving Project SuccessMany organizations execute wide range of Projects and often struggle to implement a consistent approach to Project Execution and ensuring sustainable Project Success. The right Project execution methods and approaches wi ... |
|
Register |
|
|
Leading & Managing Advanced Project ControlIn the Oil & Gas or Petrochemical industries, increased technical and commercial complexity, coping with commercial, environmental and political cost and risk, provides oil and gas megaprojects with an environment of int ... |
|
Register |
|
|
Construction Project Procurement ManagementThis course addresses the regulatory aspects of construction projects and covers procurement processes, focusing on acquisition of materials, equipment, labor and professional services. It covers contracts and associated ... |
|
Register |
|
|
Structural Design of Industrial BuildingsThe efficient structural design of industrial facilities requires engineers to understand the issues that can affect stability, safety, and serviceability. This course covers the structural design of industrial facilitie ... |
|
Register |
|
|
IRF Road Construction & MaintenanceAs a country develops and treads in the globalization era, it demands the use of more sophisticated technology to assist in its development process, particularly in the area of engineering. This course is designed for pe ... |
|
Register |
|
|
Concrete Structural Design for IndustrialConcrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength, serviceability and robustness will be discussed in s ... |
|
Register |
|
|
IRF Cement & Concrete TestingConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Buildings & Facilities Preventive Maintenance Best PracticesBuilding and facilities maintenance can be a headache when the focus of the organization is cost cutting instead of realizing the corporate strategy. That is why it is important that the building & facilities maintenance ... |
|
Register |
|
|
Construction Site Management & SupervisionConstruction site management mainly involves the rational layout of site facilities, optimum usage of space and dynamic management of plants. It directly influences security, machine running, material supply and power di ... |
|
Register |
|
|
Inspection, Assessment & Repair Of Concrete StructureThe assessment of the reinforced concrete structure is now a main challenge to the civil engineer. The repair of the reinforced concrete structures has development in the recent years due to the new technology of the mat ... |
|
Register |
|
|
Structural Steel Design and Construction by European codeSteel is the most used construction material in the USA and Europe for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable ... |
|
Register |
|
|
Dynamic Analysis for RC Structures Under Dynamic Loading in Petroleum IndustryIn most industrial projects as petroleum industry in general and power generation and also refinery projects. There are many structures affecting by dynamic load due to machines or due to blast load. The design managemen ... |
|
Register |
|
|
Design of Urban Drainage and Stormwater Management Facilities WorkshopTo design an effective urban drainage and stormwater management system, knowledge of the technical design principles for each component of the system is required. After a brief refresher of basic hydrology, this seminar ... |
|
Register |
|
|
Advanced Concrete Technology for Durable and Sustainable Civil InfrastructurePremature deterioration of civil infrastructure has created a colossal backlog of ageing concrete structures. Professionals need to design structures that can exceed their service life even in harsh environments and with ... |
|
Register |
|
|
Water Transport and DistributionThe Water Transport and Distribution short course from CDGA introduces participants to the basics of planning, hydraulic- and engineering design, construction, operation and maintenance of water transport and distributio ... |
|
Register |
|
|
Flexible and rigid pavement structural designThis course will provide the information necessary to deal with pavement challenges. Participants will examine implications of soils and pavement materials, roadway drainage, and practical techniques for field evaluation ... |
|
Register |
|
|
Structural design for concrete and steelSteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
Road construction materials and construction technologiesAn innovative highway industry provides a major market for the use of 'waste’ resources, at the same time minimizing the need for 'natural’ resources. Selected waste streams and industrial by-products, formerly bound for ... |
|
Register |
|
|
Structural design of building to prevent progressive collapseDesign of building to resist progressive collapse became an essential topic especially for building with high importance. After 9/11 many specified codes and guidelines were issued specially in USA. For contemporary stru ... |
|
Register |
|
|
A Guide to Basics of ConcreteConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Concrete Structure Designing for Industrial ProjectsReinforced concrete structures are widely used in industrial sector, especially in the onshore oil and gas fields. In industrial projects, the structure design applications are different than normal housing projects taug ... |
|
Register |
Qatar , Doha |
|||
|---|---|---|---|
|
|
Managing Successful Projects in the Oil & Gas IndustryProjects within the Oil & Gas sector face many prominent issues and the challenge of delivering projects has become more and more difficult. The challenges are increasingly complex; delivering innovative and technologica ... |
|
Register |
|
|
Leading & Managing Advanced Project ControlIn the Oil & Gas or Petrochemical industries, increased technical and commercial complexity, coping with commercial, environmental and political cost and risk, provides oil and gas megaprojects with an environment of int ... |
|
Register |
|
|
Construction Quality Control & Quality AssuranceIn this course you will learn the respon¬sibility of QA/QC in the construction in¬dustry specifically and direct to the point, how to develop quality plan, method statement, inspect, audit and engage root cause analysis ... |
|
Register |
|
|
Advanced Materials & Technology in Concrete IndustryConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
|
Building, Facility Maintenance Contractor “From Award to Completion”Buildings and structures may appear to be static, inert objects. However, in reality they are dynamic – they “move”, “breathe”, age and deteriorate with the passage of time. Unfortunately, they are sometimes designed and ... |
|
Register |
Bahrain , Manama |
|||
|---|---|---|---|
|
|
Structural Steel Design and Construction by European codeSteel is the most used construction material in the USA and Europe for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable ... |
|
Register |
Morocco , Casablanca |
|||
|---|---|---|---|
|
|
Advanced Concrete TechnologyThere have been rapid advances in concrete technology during the past three decades or so. The improvement in strength and other structural properties achieved earlier through the use of steel reinforcement are now accep ... |
|
Register |
|
|
Construction Project Procurement ManagementThis course addresses the regulatory aspects of construction projects and covers procurement processes, focusing on acquisition of materials, equipment, labor and professional services. It covers contracts and associated ... |
|
Register |
|
|
Building Upgrading and Repair, After the AssessmentAs buildings and structures age owners often rely upon engineers to perform building condition assessments to help them make the decision on the action necessary to upgrade or repair the structures. |
|
Register |
|
|
Structural Design of Industrial BuildingsThe efficient structural design of industrial facilities requires engineers to understand the issues that can affect stability, safety, and serviceability. This course covers the structural design of industrial facilitie ... |
|
Register |
|
|
Green Building Design , Construction Techniques and ImplementationThe green building is the new philosophy to design, construct and operating the different types of the buildings Whole building commissioning is also developed in USA match with the design and implement green building. ... |
|
Register |
|
|
Quality Control and Assurance for Concrete and Steel Structure ProjectsThis course is intended for structural and civil engineers who are interested in the quality control and QA with the most recent non-destructive testing for concrete and steel structure. |
|
Register |
|
|
Blast Resistance Buildings for Oil and Gas fieldThe design management procedure for industrial projects will be clarified. All the load that affect the structure building in oil and gas facilities will be illustrated. The concrete and steel structure design principal ... |
|
Register |
|
|
Construction Cost & Value ManagementConstruction project cost and economic value management are two critical competencies of construction project managers that are instrumental in achieving customer satisfaction. Accurate cost estimates form the essential ... |
|
Register |
|
|
Advanced Concrete Technology for Durable and Sustainable Civil InfrastructurePremature deterioration of civil infrastructure has created a colossal backlog of ageing concrete structures. Professionals need to design structures that can exceed their service life even in harsh environments and with ... |
|
Register |
|
|
Inspection, Assessment & Repair Of Concrete StructureThe assessment of the reinforced concrete structure is now a main challenge to the civil engineer. The repair of the reinforced concrete structures has development in the recent years due to the new technology of the mat ... |
|
Register |
|
|
Structural Steel Design and Construction by European codeSteel is the most used construction material in the USA and Europe for industrial buildings, high-rise towers, bridges and other structures. It competes with reinforced concrete in the world because of its many favorable ... |
|
Register |
|
|
Water Transport and DistributionThe Water Transport and Distribution short course from CDGA introduces participants to the basics of planning, hydraulic- and engineering design, construction, operation and maintenance of water transport and distributio ... |
|
Register |
|
|
Concrete Structural DesignReinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength , serviceability and robustness will be di ... |
|
Register |
|
|
Designing of Blast Resistance BuildingsThis Design Blast Resistance Buildings for Oil & Gas Field training course will focus about the phenomena of blast load, the dynamic material strength, in addition to the concrete and steel structure design to resist the ... |
|
Register |
|
|
Structural design for concrete and steelSteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
A Guide to Basics of ConcreteConcrete is widely used in domestic, commercial, recreational, rural and educational construction. Communities around the world rely on concrete as a safe, strong and simple building material. It is used in all types of ... |
|
Register |
|
|
Economics Development & Planning for Construction ProjectsThis course identifies economic factors that significantly influence construction projects. The objective is to introduce participants to the application of various economic analysis techniques such as project feasibilit ... |
|
Register |
|
|
Overview and up-to-date Structure Analysis and Design for Concrete BuildingsThis course provides the basics structure analysis and design of reinforced concrete structures. Moreover the attendees will be aware of update technology for the modern technique in structure analysis and design for the ... |
|
Register |
|
|
Design of Urban Drainage and Stormwater Management Facilities WorkshopTo design an effective urban drainage and stormwater management system, knowledge of the technical design principles for each component of the system is required. After a brief refresher of basic hydrology, this seminar ... |
|
Register |
|
|
Advanced Inspection, Assessment and Repair of Concrete StructureThis course is intended for civil, construction engineers and inspectors who are interested in the area of inspection, assessment and repair of concrete structures. This course enables delegates already familiar with wha ... |
|
Register |
|
|
Construction ManagementThis program covers application of construction management techniques related to the unique nature of construction projects. Looks at elements of construction management, construction delivery systems, partnering and sub ... |
|
Register |
|
|
Project Control Effective ManagementIn today’s turbulent fast-moving business environment, it is vital that organizations are able to predict the realization of value from their work. One of the most dominant approaches to the generation of value is by usi ... |
|
Register |
|
|
Comprehensive Review of Culvert, Open Channel and Storm Sewer DesignChanges in land use affect urban drainage and, therefore, present challenges for engineers who must deal with drainage planning, runoff analysis, storm sewer hydraulics, and watercourse drainage within the government reg ... |
|
Register |
|
|
Geographical and Mapping Information Management System Theory and Practice SoftwareThis course describes tasks and issues that project managers must address at different stages of GIS project development by striking a balance between theory and practice. Topics include strategic planning, work program ... |
|
Register |
|
|
IRF Construction InspectionConstruction inspectors review the construction of drainage systems, homes, buildings and highways to ensure that all building, health and safety codes are followed. This program is for use in training of road constructi ... |
|
Register |
|
|
Project Execution Tools & Techniques, Achieving Project SuccessMany organizations execute wide range of Projects and often struggle to implement a consistent approach to Project Execution and ensuring sustainable Project Success. The right Project execution methods and approaches wi ... |
|
Register |
|
|
Advanced Steel Structure Design & Construction For Oil & Gas & Petrochemical IndustrySteel and reinforced concrete structures are the most used in industrial sector special in oil and gas field for onshore and offshore. Therefore, the basis of design for concrete and steel structures will be discussed in ... |
|
Register |
|
|
Building, Facility Maintenance Contractor “From Award to Completion”Buildings and structures may appear to be static, inert objects. However, in reality they are dynamic – they “move”, “breathe”, age and deteriorate with the passage of time. Unfortunately, they are sometimes designed and ... |
|
Register |
|
|
Construction Cost Estimating and Cost ControlCost estimating is the process of systematically forecasting all costs associated with completing a project within a defined scope. When it comes to construction, construction cost estimating forecasts all of the project ... |
|
Register |
Saudi Arabia , Dammam |
|||
|---|---|---|---|
|
|
Water Transport and DistributionThe Water Transport and Distribution short course from CDGA introduces participants to the basics of planning, hydraulic- and engineering design, construction, operation and maintenance of water transport and distributio ... |
|
Register |
|
|
Construction Risk ManagementThis course addresses the critical survival and profitability factors for companies managing projects in the construction industry in an economic environment characterized by uncertainty and change. Subjects covered incl ... |
|
Register |
|
|
Advanced Civil Concrete TechnologyConcrete technology refers to the process of using concrete in various structures. It can also be defined as the widespread use of concrete globally. The durability and versatility of the concrete material is one of the ... |
|
Register |
|
|
Construction & Maintenance of Asphalt RoadsThe road transport network of any country plays a vital role in its economy, and the physical condition of its infrastructure is critical. Without adequate and timely maintenance, highways and rural roads alike inexorabl ... |
|
Register |
|
|
Advanced Material, Design & Repair Reinforced Concrete DesignConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
Oman , Salalah |
|||
|---|---|---|---|
|
|
Civil Modern Concrete TechnologyConcrete is a composite with properties that change with time. During service, the quality of concrete provided by initial curing can be improved by subsequent wetting as in the cases of foundations or water retaining st ... |
|
Register |
Switzerland , Geneva |
|||
|---|---|---|---|
|
|
Construction Project Procurement ManagementThis course addresses the regulatory aspects of construction projects and covers procurement processes, focusing on acquisition of materials, equipment, labor and professional services. It covers contracts and associated ... |
|
Register |
|
|
Advanced Material, Design & Repair Reinforced Concrete DesignConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
Malaysia , Kuala-Lumpur |
|||
|---|---|---|---|
|
|
Construction Quality Control & Quality AssuranceIn this course you will learn the respon¬sibility of QA/QC in the construction in¬dustry specifically and direct to the point, how to develop quality plan, method statement, inspect, audit and engage root cause analysis ... |
|
Register |
|
|
Basic Design of Concrete Foundation & Soil InvestigationConcrete is widely used for making architectural structures, foundations, brick, block walls, pavements, bridges, overpasses, highways, runways, parking structures, dams, pools, reservoirs, pipes, footings for gates, fen ... |
|
Register |
|
|
Stormwater Management - Design, Inspection and Operation,Maintenance of Stormwater Control FacilitiesThe success of a long-term cost effective operation of a stormwater management facility depends on the 1) appropriate design, 2) an efficient inspection program undertaken during the construction phase and 3) the adoptio ... |
|
Register |
|
|
Structural Reliability Analysis and design in Civil EngineeringEfficient structural design of industrial facilities requires engineers to possess integrated knowledge of theories and practices. It is essential to understand the issues that can impact stability, safety, and serviceab ... |
|
Register |
|
|
IRF Construction InspectionConstruction inspectors review the construction of drainage systems, homes, buildings and highways to ensure that all building, health and safety codes are followed. This program is for use in training of road constructi ... |
|
Register |
|
|
Construction Cost Estimating and Cost ControlCost estimating is the process of systematically forecasting all costs associated with completing a project within a defined scope. When it comes to construction, construction cost estimating forecasts all of the project ... |
|
Register |
|
|
Green Building Design , Construction Techniques and ImplementationThe green building is the new philosophy to design, construct and operating the different types of the buildings Whole building commissioning is also developed in USA match with the design and implement green building. ... |
|
Register |
|
|
Modern Structural Renovation of BuildingsThe renovation of the reinforced concrete structures has become common in recent years due to the development in technologies, materials and the techniques for maintenance and repair. This course will present methods for ... |
|
Register |
|
|
Introduction to geographic information systems (GIS)This course introduces the hardware and software components of a Geographic Information Systems and reviews GIS applications. Topics include data structures and basic functions, methods of data capture and sources of dat ... |
|
Register |
|
|
Construction Supervision SkillsThe construction industry represents one of the main industries in the world by general and especially in the developed countries, was the achievements of this industry like: areas construction, the energy provision, the ... |
|
Register |
|
|
Advanced Materials & Technology in Concrete IndustryConcrete is used throughout the world for a wide range of applications. In order to improve the properties of concrete, recent advances in material science introduce new materials or admixtures to be added to or replace ... |
|
Register |
|
|
Managing Successful Projects in the Oil & Gas IndustryProjects within the Oil & Gas sector face many prominent issues and the challenge of delivering projects has become more and more difficult. The challenges are increasingly complex; delivering innovative and technologica ... |
|
Register |
|
|
Advanced Civil Concrete TechnologyConcrete technology refers to the process of using concrete in various structures. It can also be defined as the widespread use of concrete globally. The durability and versatility of the concrete material is one of the ... |
|
Register |
|
|
Project Decision Making in the Oil & Gas IndustryDoes your project organization’s decisions provide clear guidance to future projects? Today, large projects in the oil and gas industry face daunting challenges as they become increasingly complex, innovative and technol ... |
|
Register |
|
|
The Construction Industry OverviewThe construction industry is the largest industry in the world. It is more of a service than a manufacturing industry. Growth in this industry in fact is an indicator of the economic conditions of a country. This is beca ... |
|
Register |
|
|
Structural Design for Non Structural EngineersArchitects and non-structural engineers often work together with structural engineers on design projects. An understanding of the basic concepts of structural engineering could make their jobs easier. If you are involved ... |
|
Register |
|
|
Advanced Etabs WorkshopEtabs is a computer aided analysis and design software used to solve the multistoried structures indeterminacy in few seconds by dividing the entire structure into objects with most accuracy, various types of structures ... |
|
Register |
|
|
Concrete Structural DesignReinforced concrete structures are widely used in industrial sector special in oil and gas field for onshore. Therefore, the basis of design for concrete structure for strength , serviceability and robustness will be di ... |
|
Register |
|
|
Project Quality Management MasterclassIn today’s fiercely competitive and fast changing business environment, delivery of high quality project outcomes is the key to organizations’ survival and prosperity. Managers are constantly seeking to produce good qual ... |
|
Register |
|
|
Economics Development & Planning for Construction ProjectsThis course identifies economic factors that significantly influence construction projects. The objective is to introduce participants to the application of various economic analysis techniques such as project feasibilit ... |
|
Register |
|
|
Construction & Maintenance of Asphalt RoadsThe road transport network of any country plays a vital role in its economy, and the physical condition of its infrastructure is critical. Without adequate and timely maintenance, highways and rural roads alike inexorabl ... |
|
Register |
|
|
Overview and up-to-date Structure Analysis and Design for Concrete BuildingsThis course provides the basics structure analysis and design of reinforced concrete structures. Moreover the attendees will be aware of update technology for the modern technique in structure analysis and design for the ... |
|
Register |
Indonesia , Indonesia |
|||
|---|---|---|---|
|
|
Advanced Project & Construction ManagementThis course is an advanced level course building on basic knowledge gained from earlier study and practical experience. It is designed for practicing project managers; construction managers; engineers; surveyors; planner ... |
|
Register |
|
|
Building Condition AssessmentAs buildings age, those responsible for them must get involved with condition surveys. These individuals have to evaluate materials, conduct destructive or non-destructive tests, evaluate results and decide on the necess ... |
|
Register |
|
|
Civil Modern Concrete TechnologyConcrete is a composite with properties that change with time. During service, the quality of concrete provided by initial curing can be improved by subsequent wetting as in the cases of foundations or water retaining st ... |
|
Register |
|
|
Construction Risk ManagementThis course addresses the critical survival and profitability factors for companies managing projects in the construction industry in an economic environment characterized by uncertainty and change. Subjects covered incl ... |
|
Register |
Nethersland , Amsterdam |
|||
|---|---|---|---|
|
|
Designing and analyzing Water Networks & Pumping StationsThe Course provides a snap-shot of current research in the field of on-line monitoring and control of clean and untreated water systems. The latest techniques in modelling drinking water quality and river quality are pr ... |
|
Register |
|
|
Blast Resistance Buildings for Oil and Gas fieldThe design management procedure for industrial projects will be clarified. All the load that affect the structure building in oil and gas facilities will be illustrated. The concrete and steel structure design principal ... |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
CDGA keen to selects highly technical instructors based on professional field experience
Since CDGA was established, it considered a training partner for world class oil & gas institution
3012, Block 3, 30 Euro Business Park, Little Island, Co. Cork, T45 V220, Ireland
Mon to Fri 09:00 AM to 06:00 PM
Contact Us anytime!