The course covers to moderate practices angle well bores, extended reach and horizontal drilling. Loads simple drill stem design for vertical applied by tension, combined torsion, burst pressure, collapse pressure, compression, slip and stability forces are considered. Design steps to reduce fatigue damage are also covered.

By the end of this course delegates will be able to:

• Place the drill string design process in context with other planning and operational considerations
• Refresh underlying physics of drill string failures and mechanical properties of drill string materials
• Clarify performance properties of drill string components and how to apply design margins
• Design cost-effective BHAs and match them to your bit
• Gain specific application experience analyzing common load cases for both near-vertical and high-angle situations: Tension loads, Torque loads, Combined tension-torque loads, Fatigue loads, Buckling loads
• Understand the basis for industry software design tools, including torque and drag, casing wear, and hydraulics.
• Identify drilling tools and operational practices to reduce both torque and drag and casing wear.
• Diagnose and mitigate vibration to reduce drill string damage and failure.
• Optimize your drill string inspection program using the latest industry standards.
• Gain insight into emerging drill string technologies and the possible benefits to your operations.
• Describe metallurgy and manufacturing process
• Complete overload and fatigue design.
• Set operating limits for drill string including tension, torsion and combined loading.
• Select connections to meet project-specific needs
• Differentiate between overload and fatigue failures and specify steps to reduce the risk of additional failures.
• Determine location of drill string buckling and maximum WOB.
• Describe drivers for fatigue and tools available to manage fatigue.
• Explain source of casing wear and mitigation steps available.
• Illustrate sources of drill string vibration.
• Design and qualify heavy duty landing strings.
• Understand how back off failures occur while under reaming and how to prevent them.
• Specify drill string inspection programs including methods, acceptance criteria and procedures.
• Schedule drill string inspection for specific wells and drilling campaigns.
• Understand the advantages and limitations of inspection methods when selecting an inspection program.

Drilling Engineers, Senior Drilling Engineers, Drilling Supervisors, Work over Engineers, Petroleum Engineers, Completion Engineers, Tool Pushers, Reservoir and Senior Reservoir Engineers, Geologists, Production Engineers & Technologists, Well site Engineers, Lifting Personnel, Maintenance Engineers, Foremen, Industry Personnel.

• Drill String and BHA Failure Prevention.
• Low-Angle Design Applications.
• High-Angle Design Applications.
• Torque, Drag, and Casing Wear Mitigation.
• Vibration Monitoring and Avoidance.
• Drill String Handling and Inspection.
• Design Factors.
• Vertical to Moderate Angles Well Bores.
• Choosing Drill Collar Size, Connection and Connection Features.
• Determining Tensional Strength of Drill Collar Connections.
• Determining Minimum Lengths of Drill Collars and HWDP Section.
• Checking Slip Crushing Forces.
• Calculating Allowable and Working Tension Loads.
• Calculating Maximum Permissible Length of Each Drill Pipe Section..Extended Reach Well Bore.
• Load Predication.
• Load Analysis.
• Jar Placement.
• Fatigue Mitigation and Buckling.
• Build and Hold Well Bores.
• Bucking Initiation Paints Low Tangent Paint.
• Buckling Above Kickoff Point, Below Buckling & Below Tangent Point.
• Stabilizers in High Angle Hole.

• Jar Placement.
• ¬Dropping Wellbores.
• How Drill Stem Fail.
• Drill Pipe Failure Prevention Plan.
• Drill Pipe Tube Fatigue Failure.
• BHA Connections Fatigue Failure.
• BHA Connection Stress Relief I BSR.
• Drill Crew Five Second Checks.
• Drill String Care and Handling Practices.
• Basic Jar Operations.
• Pump Open Force.
• Cocking/ Tripping the Jar.
• Drilling Accelerator.
• Jar Rules I Placement Guide Line.
• Down Hole Equipment Failure.
• Tool Failure Causes.
• Factors Influence Tool Selection.
• Rig Site Tool Selection / Inspection.
• Inspection Methods.
• Standard Inspection Programs Visual Tube Inspection.

CDGA attendance certificate will be issued to all attendees completing minimum of 80% of the total course duration.